(3) Costs associated with providing accessible telephones, such as relocating a telephone to an accessible height, installing amplification devices, or installing a text telephone (TTY);...
Search Results "Table Height"
Commonly Searched Documents
-
§ 35.151(b)(4)(iii)(B)(3)
-
703.5.7 Stroke Thickness
Stroke thickness of the uppercase letter "I" shall be 10 percent minimum and 30 percent maximum of the height of the character....
-
§ 36.403(f)(2)(iii)
(iii) Costs associated with providing accessible telephones, such as relocating the telephone to an accessible height, installing amplification devices, or installing a text telephone (TTY...
-
M303.2.4.1 Toe Clearance
Toe clearance shall be provided at a height of 9 inches (230 mm) above the floor to a depth of 6 inches (150 mm) maximum....
-
§ 35.151(b)(4)(iii)(B)(3)
(3) Costs associated with providing accessible telephones, such as relocating the telephone to an accessible height, installing amplification devices, or installing a text telephone (TTY...
-
Obstacles [1018.5]
When beach access routes are constructed of concrete, asphalt, or boards, obstacles cannot exceed one-half inch in height at their highest point....
-
Data Deficiencies
Data Deficiencies Advocates on the committee, representing the interests of people with disabilities, strongly stated that a 17” height is essential to accommodate the largest segment...
-
11B-705.1.1.1 Dome size
warning surface shall have a base diameter of 0.9 inch (22.9 mm) minimum and 0.92 inch (23.4 mm) maximum, a top diameter of 0.45 inch (11.4 mm) minimum and 0.47 inch (11.9 mm) maximum, and a height...
-
11B-703.8.7 Character spacing
Low resolution VMS character spacing shall comply with the pixel count for character spacing in Table 11B-703.8.5....
-
11B-703.8.7 Character spacing
Low resolution VMS character spacing shall comply with the pixel count for character spacing in Table 11B-703.8.5....
-
Obstacles [1016.5]
The limit on the height of obstacles on ORARs, passing spaces, and resting intervals is based on the surface material used....
-
Data Analysis
Descriptive statistics were used to find the population-based percentile level, highest, and lowest heights for transfers for the one-step transfer protocols A, B, and C and the two-step...
-
§382.133(e)(2)
(2) The maximum weight and dimensions (length, width, height) of the device to be used by an individual that can be accommodated in the aircraft cabin consistent with FAA safety requirements...
-
4.34.5.2(2)
(2) The height of the water closet shall be at least 15 in (380 mm), and no more than 19 in (485 mm), measured to the top of the toilet seat....
-
Organization and Format
Several suggested that the final rule contain a subject index, that pages not be numbered separately for each part of the rule, and that a table of contents be provided for advisory material...
-
8.2 Expanding Medical Equipment Covered
Table 3.1 lists the equipment types mentioned during this exercise....
-
The Presentation Area / Speaker’s Platform Design and Considerations
Presenters with disabilities may have very specific preferences for microphone type, podium or lectern use, and panel table set-up....
-
Using Patient Lifts
Using Patient Lifts Medical providers may need a lift in order to transfer some patients safely onto an exam table....
-
405.2 Slope
EXCEPTION: In existing sites, buildings, and facilities, ramps shall be permitted to have running slopes steeper than 1:12 complying with Table 405.2 where such slopes are necessary due...
-
405.2 Slope
EXCEPTION: In existing sites, buildings, and facilities, ramps shall be permitted to have running slopes steeper than 1:12 complying with Table 405.2 where such slopes are necessary due...
-
405.2 Slope
EXCEPTION: In existing sites, buildings, and facilities, ramps shall be permitted to have running slopes steeper than 1:12 complying with Table 405.2 where such slopes are necessary due...
- Westside Center for Independent Living - Los Angeles, Santa Monica, CA
-
407.4.7.2 Keypads
The dot shall be 0.118 inch (3 mm) to 0.120 inch (3.05 mm) base diameter and in other aspects comply with Table 703.3.1....
-
407.4.7.2 Keypads
The dot shall be 0.118 inch (3 mm) to 0.120 inch (3.05 mm) base diameter and in other aspects comply with Table 703.3.1....