Tactile signs are required to be located alongside the latch side of doors so that clear floor space at least 18 by 18 inches, centered on the tactile characters, is provided outside the...
Search Results "Swing Clear Hinge"
Filters
Commonly Searched Documents
-
Mounting Height and Location
-
What is an accessibility evaluation survey and when is one needed?
For example, doorways must be checked to see if they have at least 32 inches of "clear width."...
-
Transfer Platform: ADA Standard Section 1009.5.1
Transfer platforms shall provide 19 inches (485 mm) minimum clear depth and 24 inches (610 mm) minimum clear width....
-
11B-1009.5.1 Transfer platform
Transfer platforms shall provide 19 inches (483 mm) minimum clear depth and 24 inches (610 mm) minimum clear width....
-
Panda UTS.60 Thermally Broken ULTRA Folding Door System
Glazing: Clear Low-E insulated is the standard. Various types of glass and other materials at a thickness of up to 1 1/8″ may be used....
-
Lowered section for bar
Why can't this lowered section be hinged?...
-
Width and Length: ADA Standard Section 1002.4.4.1
Wheelchair spaces shall provide a clear width of 30 inches (760 mm) minimum and a clear length of 48 inches (1220 mm) minimum measured to 9 inches (230 mm) minimum above the floor surface...
-
11B-1002.4.4.1 Width and length
Wheelchair spaces shall provide a clear width of 30 inches (762 mm) minimum and a clear length of 48 inches (1219 mm) minimum measured to 9 inches (229 mm) minimum above the floor surface...
-
11B-810.2.2 Dimensions
Bus stop boarding and alighting areas shall provide a clear length of 96 inches (2438 mm) minimum, measured perpendicular to the curb or vehicle roadway edge, and a clear width of 60 inches...
-
Size: ADA Standard Section 1009.5.6
Each transfer step shall have a tread clear depth of 14 inches (355 mm) minimum and 17 inches (430 mm) maximum and shall have a tread clear width of 24 inches (610 mm) minimum....
-
11B-1009.5.6 Size
Each transfer step shall have a tread clear depth of 14 inches (356 mm) minimum and 17 inches (432 mm) maximum and shall have a tread clear width of 24 inches (610 mm) minimum....
-
404.2.9 Door and Gate Opening Force
Interior hinged doors and gates: 5 pounds (22.2 N) maximum. 2. Sliding or folding doors: 5 pounds (22.2 N) maximum....
-
Reach Range
The Board has included an exception for bottom-hinged appliance doors, which do not have to be within reach range requirements specified in 309.3 when open (804.6.2, Exception 2)....
-
404.2.9 Door and Gate Opening Force
Interior hinged doors and gates: 5 pounds (22.2 N) maximum. 2. Sliding or folding doors: 5 pounds (22.2 N) maximum....
-
Panda TS.60 Thermally Broken Folding Door System
Glazing: Clear Low-E insulated is the standard. Various types of glass and other materials at a thickness of up to 1″ may be used....
-
Poured in Place Rubber
But it was the PIP surface at two swing bays that was found in non-compliance with HIC scores well over the 1,000 HIC allowable under the standard. ...
-
Allegion Falcon SC60 Series Surface Mounted Door Closer
Specifications Meets ANSI A117.1 ANSI/BHMA A156.4, Grade 1 UL Listed 1 3/8" diameter piston Closer mounts hinge side, top jamb or parallel arm...
-
Figure 404.2.4.1(a) Maneuvering Clearances at Manual Swinging Doors and Gates: Front Approach, Pull Side – Drawing from the U.S. Access Board
-
Balco FMS-A and FMS-V Roll-Up Floor Mat
Balco's Premium Roll-Up Mat is a Vinyl Hinge Construction with Standard Mill Finish Aluminum; Clear Anodized, and Medium Bronze Anodized Finishes Available....
-
AD Systems’ Patient Restrooms
Often, a 40” or greater clear opening is desired but having such a large door swing into a patient restroom can be very unwieldy and make other ADA clearances extremely difficult to maintain...
-
AJW Architectural Products U127 40 oz. Vertical Liquid Soap Dispenser w/ Push-up Valve - Surface Mounted
Viewer: Clear plastic window allows a constant fluid level check. Concealed Mounting Plate: Fabricated of heavy gauge stainless steel....
-
Ground Level Play Components: ADA Standard Section 240.2.1
Section 240.2.1 covers scoping requirements in the current ADA Standards for ground level play components.
-
11B-240.2.1 Ground level play components
Examples of ground level play components may include spring rockers, swings, diggers, and stand-alone slides....
-
Inventory Control Devices
A minimum 12 inch clearance is required on the push side of swinging doors when the door has both a closer and a latch....
