weight gauges increase available bearing surface area for maximum friction reduction Hinges can be furnished with hospital tips Full surface and half surface hinges packed with flat head...
Search Results "Head End Wall"
Commonly Searched Documents
- Stanley FBB 268 Heavy Weight Ball Bearing “Swing Clear” Offset Door Hinge
- Stanley FBB 264 Heavy Weight Ball Bearing “Swing Clear” Offset Door Hinge
- Stanley FBB 269 Heavy Weight Ball Bearing “Swing Clear” Offset Door Hinge
-
11B-408.4.1 Car dimensions and doors
Car doors shall be positioned at the narrow ends of cars and shall provide 32 inches (813 mm) minimum clear width. Exceptions: 1. ...
-
M303.2.4.1.2 Height
Wheelchair spaces shall include toe clearance 9 inches (230 mm) high minimum above the floor measured to a depth of 6 inches (150 mm) maximum from the toe end of the wheelchair space....
-
Issue: 9-1-1 Systems
City governments must ensure that emergency operators are trained to use the TTY not only when they recognize the tones of a TTY at the other end of the line, but also when they receive...
-
Section 36.302(c) Service Animals (Section-by-Section Analysis)
Toward that end, the final rule has been revised to include the Department's policy interpretations as outlined in published technical assistance, Commonly Asked Questions about Service...
-
Boarding Pier Clearances: ADA Standard Section 1003.3.2
As the water level decreases, segments of the chain end up resting on the launch ramp surface, matching the slope of the launch ramp....
-
Avoid the extremes of surface reflectivity and contrast (slides 11 and 13)
And so I think I am better served by keeping my head up and my body erect and trusting my other senses as I descend – in particular, descending the stair....
- Independent Living Center (TILC) - Joplin, MO
- Independent Living Center of Southeast Missouri (ILCSEMO) - Poplar Bluff, MO
- Hussey Seating Company Flip-Up Armrest
-
604.8.1.4 Toe Clearance
EXCEPTION: Toe clearance at the front partition is not required in a compartment greater than 62 inches (1575 mm) deep with a wall-hung water closet or 65 inches (1650 mm) deep with a floor-mounted...
-
604.7 Dispensers
If toilet paper dispensers are installed above the side wall grab bar, the outlet of the toilet paper dispenser must be 48 inches (1220 mm) maximum above the finish floor and the top of...
-
C. Accessibility Within Toilet Rooms
Is at least one stall at least 60 inches wide and 56 inches deep (wall mounted toilet) or 59 inches deep (floor mounted toilet)?...
-
Clear Floor Space [4.35.2]
Placing the bench in a corner will allow the walls to be used as support or as a backrest....
-
Forward Approach
Knee and toe clearances can be provided at some fountains by locating the cooling mechanism or "chiller" in a wall recess....
-
2.4.4.1. Repair Costs
Captioning and audio description hardware is typically mounted high on a wall in a movie theater auditorium or otherwise placed in the projection booth. ...
-
Technical difficulty and readily achievable
It may be impossible to alter or expand a bathroom due to load bearing walls....
-
Employee Work Areas [§206.2.8]
This applies to the size of work areas as defined by permanently installed walls, partitions, counters, casework, or furnishings, but not modular partitions or furnishings, including systems...
-
11B-407.4.1 Car dimensions
DIMENSIONS MINIMUM DIMENSIONS DOOR LOCATION Door clear width Inside car, side to side Inside car, back wall...
-
Do facilities in remote locations have to be accessible?
These toilets are simply risers placed over a pit, with no walls. The Superior National Forest has developed an accessible riser for these remote settings....
- Unity Surfacing Systems Soft-Land Rubberized Safety Surfacing
- Norton Surface Mounted 5700 Series Low Energy Door Operator