Entrances (slides 3 and 4) Additional comments: Need better signage at entrances Handle locations should be consistent Ramps (slide 5) Route of Travel...
Search Results "Fishing Location"
-
Jeanne Halloin, IES. Existing Standards and Design Guidance
-
4.1.3(19)(a)
(a) In places of assembly with fixed seating accessible wheelchair locations shall comply with 4.33.2, 4.33.3, and 4.33.4 and shall be provided consistent with the following table:...
-
R308.2 Transit Shelters
Where seating is provided within transit shelters, the clear space shall be located either at one end of a seat or shall not overlap the area within 460 mm (1.5 ft) from the front edge of...
-
NOTIFICATION
all agency heads; publish the Notice in a local newspaper of general circulation serving the City of Waukegan; post the Notice on its Internet Home Page; and post copies in conspicuous locations...
-
4.34.6.7* OVENS
Ovens shall be of the self-cleaning type or be located adjacent to an adjustable height counter with knee space below (see Fig. 52)....
-
Diagonal Curb Ramps [§406.6]
If curb ramps are placed diagonally at an intersection, it is important that clear space 48” long min. is available at the bottom that is outside active vehicle traffic lanes and is located...
-
Required Compliance [§209]
at these facilities, whether or not passenger loading zones are planned: licensed medical care and licensed long term care facilities where the period of stay exceeds 24 hours (located...
-
Pay Stations
Require-ments [sic] for operable parts cover clear floor space, operating characteristics, and location within accessible reach ranges....
-
Paragraph (d) (Advisory Guidance)
Individuals who are deaf or hard of hearing cannot locate or identify controls that require hearing....
-
11B-1003.2.2 Boarding piers at boat launch ramps
Where the accessible route serving a floating boarding pier or skid pier is located within a boat launch ramp, the portion of the accessible route located within the boat launch ramp shall...
-
11B-409.1 General
Accessibility scoping requirements for elevators and lifts are located in Sections 11B-206.6 and 11B-206.7; technical requirements are located in Sections 11B-407, 11B-408, 11B-409 and 11B...
-
11B-604.8.1.5 Grab bars
A side-wall grab bar complying with Section 11B-604.5.1 shall be provided and shall be located on the wall closest to the water closet....
-
11B-409.1 General
Accessibility scoping requirements for elevators and lifts are located in Sections 11B-206.6 and 11B-207.6 [sic]; technical requirements are located in Sections 11B-407, 11B-408, 11B-409...
-
M302.2.4 Transfer Sides (Section-by-Section Analysis)
(Significant Changes – Transfer Surface Location)....
-
5.4.2.2 Transfer and Positioning Support Length Recommendations for Imaging Equipment with Transfer Surfaces
It is to be located at the designated transfer location....
-
"Video Interpreting Services (VIS)"
., a live interpreter in another location), who can see and sign to the individual through a camera located on or near the monitor, while others can communicate by speaking. ...
-
Car Controls [4.10.12]
Control panels must be located so that no floor button is higher than 54 inches for a side reach and 48 inches for a front approach....
-
G. TRAINING
Specifically, all Cavs Employees shall be trained on the ADA issues relevant to their position at Quicken Loans Arena, including, but not limited to: (1) location of accessible seating;...
-
Toilet Room Configuration
The most common practice among the innovative designs was the placement of the bathroom located in a corner of a resident room with an out-swinging bathroom door oriented at 450 to the resident...
-
Features of Accessible Parking Spaces
If the accessible route is located in front of the parking space, install wheel stops to keep vehicles from reducing the clear width of the accessible route below 36 inches. 3....
-
11B-809.12 Electrical receptacles, controls and switches
Electrical receptacles on branch circuits of 30 amperes or less, communication system receptacles, controls and switches shall be located as follows: Where there is no obstruction...
-
C. Getting Started
If possible, take an identifying “location” photograph that shows the name of the facility and the address so that other photographs can be identified correctly....
-
220 Automatic Teller Machines and Fare Machines
4.1.3(20) Where automated teller machines (ATMs) are provided, each ATM shall comply with the requirements of 4.34 except where two or more are provided at a location...