An accessible route complying with Division 4 shall be provided to the ground- or floor-level entry points, where provided, of stairs, ladders, or other means of reaching the raised elements...
Search Results "Plumbing Element"
-
11B-203.11 Water slides
-
Exceptions for Historic Facilities
that the specific language for the exceptions for accessible routes, entrances, and toilet facilities be included in section 202.5, instead of in the various scoping provisions for those elements...
-
11B-703.3.2 Position
Braille shall be separated 3/8 inch (9.5 mm) minimum and ½ inch (12.7 mm) maximum from any other tactile characters and 3/8 inch (9.5 mm) minimum from raised borders and decorative elements...
-
Alterations and Additions [F244.2.1]
to regulations issued under section 504 of the Rehabilitation Act, which designates specific camping units to provide mobility features, the entity is not required to provide accessible elements...
-
Alterations and Additions [F245.2.3]
to regulations issued under section 504 of the Rehabilitation Act, which designates specific picnic units to provide mobility features, the entity is not required to provide accessible elements...
-
Section 36.211 Maintenance of Accessible Features (Section-by-Section Analysis)
of this provision and proposed one change to the section to address the discrete situation in which the scoping requirements provided in the 2010 Standards reduce the number of required elements...
-
Section 35.133 Maintenance of accessible features. (Section-by-Section Analysis)
of this provision and proposed one change to the section to address the discrete situation in which the scoping requirements provided in the 2010 Standards reduce the number of required elements...
-
11B-703.3.2 Position
Braille shall be separated 3/8 inch (9.5 mm) minimum and ½ inch (12.7 mm) maximum from any other tactile characters and 3/8 inch (9.5 mm) minimum from raised borders and decorative elements...
-
11B-703.3.2 Position
Braille shall be separated 3/8 inch (9.5 mm) minimum and ½ inch (12.7 mm) maximum from any other tactile characters and 3/8 inch (9.5 mm) minimum from raised borders and decorative elements...
-
11B-201.1 Scope
These requirements are to be applied to all areas of a facility unless exempted, or where scoping limits the number of multiple elements required to be accessible....
-
Seton Florida State Fine Signs - $100 Fine F.S. 316.14
signs be clearly seen at night Non-reflective surface are perfect for day time use Choose to have Seton UltraTuff™ on your sign to boost its protection from the different elements...
-
201.1 Scope
These standards apply to fixed or built-in elements of buildings, structures, site improvements, and pedestrian routes or vehicular ways located on a site....
-
Character Spacing: ADA Standard Section 703.2.7
Characters shall be separated from raised borders and decorative elements 3/8 inch (9.5 mm) minimum....
-
Application Based on Building or Facility Use: ADA Standard Section 201.2
Section 201.2 covers the application of the most current requirements based on the building or facility use.
-
Path of Travel
interior or exterior pedestrian ramps; clear floor paths through lobbies, corridors, rooms, and other improved areas; parking access aisles; elevators and lifts; or a combination of these elements...
-
11B-703.2.7 Character spacing
Characters shall be separated from raised borders and decorative elements 3/8 inch (9.5 mm) minimum....
-
11B-707 Automatic teller machines, fare machines and point-of-sale devices
However, for entities covered by the ADA, the Department of Justice regulations that implement the ADA provide additional guidance regarding the relationship between these requirements and elements...
-
11B-707 Automatic teller machines, fare machines and point-of-sale devices
However, for entities covered by the ADA, the Department of Justice regulations that implement the ADA provide additional guidance regarding the relationship between these requirements and elements...
-
11B-703.2.7 Character spacing
Characters shall be separated from raised borders and decorative elements 3/8 inch (9.5 mm) minimum....
-
11B-247.1.2.5 Hazardous vehicular areas
If a walk crosses or adjoins a vehicular way, and the walking surfaces are not separated by curbs, railings or other elements between the pedestrian areas and vehicular areas, the boundary...
-
§ 35.151(b)(4)(ii)(A)
interior or exterior pedestrian ramps; clear floor paths through lobbies, corridors, rooms, and other improved areas; parking access aisles; elevators and lifts; or a combination of these elements...
-
2. Using the Tape Measure
Using the Tape Measure A metal tape measure is needed to measure the length, width, height, and depth of various elements....
-
4.1.6(3)
(3) Where substantial alteration occurs to a building or facility, then each element or space that is altered or added shall comply with the applicable provisions of 4.1.1 to 4.1.4 of 4.1...
-
11B-247.1.2.5 Hazardous vehicular areas
If a walk crosses or adjoins a vehicular way, and the walking surfaces are not separated by curbs, railings or other elements between the pedestrian areas and vehicular areas, the boundary...
