Required clear floor spaces, clearance at fixtures, and turning space shall be permitted to overlap....
Search Results "Handrail Clearance"
-
11B-603.2.2 Overlap
-
608.2.1 Transfer Type Shower Compartments
Clearance of 36 inches (915 mm) wide minimum by 48 inches (1220 mm) long minimum measured from the control wall shall be provided....
-
C2‒1
., wall-mounted boxes, signs, handrail extensions) with bottom edges that are between 27 inches and 80 inches above the walkway and that extend more than 4 inches into the sidewalk or walkway...
-
1007.3 Stairways
In order to be considered part of an accessible means of egress, a stairway between stories shall have a clear width of 48 inches (1219 mm) minimum between handrails and shall either incorporate...
-
Attachment E
Attachment E: Program Access Modifications at Emergency Shelters East Middle School Parking. Although 2 parking spaces are reserved for persons with...
-
ACCESS AISLE
[DSA-AC] An accessible pedestrian space adjacent to or between parking spaces that provides clearances in compliance with this code....
- SafePath VulcanLanding™ Rubber Transition Ramp
-
902.2 Clear Floor or Ground Space
Knee and toe clearance complying with 306 shall be provided....
-
902.2 Clear Floor or Ground Space
Knee and toe clearance complying with 306 shall be provided....
-
5.3.6 Entrance
Sloped entries do not require handrails....
-
5.3.6 Entrance
Sloped entries do not require handrails....
-
Ramps
They must meet the ADA's requirements regarding slope, width, landings, handrails, and edge protection....
-
1.1.17 Stairs
For stairs with intermediate handrails take additional measurements approximately 15 in. (380 mm) on both sides of the intermediate handrail....
-
11B-603.2.3 Door swing
Doors shall not swing into the clear floor space or clearance required for any fixture....
-
11B-603.2.3 Door swing
Doors shall not swing into the clear floor space or clearance required for any fixture....
-
AISLE
., that provides clearances in in compliance with this code....
-
AISLE
., that provides clearances in compliance with this code....
-
Grab Bars
If only one bar is provided, the clearance must be a minimum of 24 inches on each side of the bar....
-
1009.4.5 Grab Bars
Where one grab bar is provided, clearance shall be 24 inches (610 mm) minimum on both sides of the grab bar....
-
902.2 Clear Floor or Ground Space
Knee and toe clearance complying...
-
11B-1002.5.3 Transfer entry
Where openings are provided for transfer to amusement ride seats, the openings shall provide clearance for transfer from a wheelchair or mobility aid to the amusement ride seat....
-
1002.5.3 Transfer Entry
Where openings are provided for transfer to amusement ride seats, the openings shall provide clearance for transfer from a wheelchair or mobility aid to the amusement ride seat....
-
1002.5.3 Transfer Entry
Where openings are provided for transfer to amusement ride seats, the openings shall provide clearance for transfer from a wheelchair or mobility aid to the amusement ride seat....
-
AISLE
., that provides clearances in in compliance with this code....