Detectable directional texture at transit boarding platforms shall comply with Figure 11B-705.2 and shall be 0.1 inch (2.5 mm) in height that tapers off to 0.04 inch (1.0 mm) , with bars...
Search Results "Water Closet Grab Bar"
Filters
Commonly Searched Documents
-
11B-705.2 Detectable directional texture
-
11B-705.2 Detectable directional texture
Detectable directional texture at transit boarding platforms shall comply with Figure 11B-705.2 and shall be 0.1 inch (2.5 mm) in height that tapers off to 0.04 inch (1.0 mm) , with bars...
-
Mockett DH403-BB Square Bar Door Handle Back to Back
DESCRIPTION Exquisite leather door handles. Leather bound handles with 1” square body make for an easy grip surface. Classic look in a stunningly modern design. Sold as a set...
-
Bobrick Recessed Heavy-Duty Soap Dish and Bar B-4390
Type 304 stainless steel, matte polished finish. Mounting clamp for stud walls. Unit 7 3⁄16" W, 5" H (185 x 125mm). Rough Wall Opening: 6" W, 4" H, 4" min. depth (150 x 100 x 100mm).
-
Allegion Von Duprin 88 Series Cross Bar Exit Device
Exit devices are a critical part of a door opening or access system and will provide safe and reliable service when properly applied and maintained. Von Duprin Division designs and...
-
Allegion Von Duprin 55 Series Cross Bar Exit Devices
5575 mortise lock devices for all types of single and double doors. UL listed for accident hazard installations. The 5575 mortise lock is equipped with a 3/4" (19mm)...
-
11B-806.2 Guest rooms with mobility features
For example, closets in guest rooms must comply with the applicable provisions for storage specified in scoping....
-
11B-806.2 Guest rooms with mobility features
For example, closets in guest rooms must comply with the applicable provisions for storage specified in scoping....
-
Floating Trail Bridges and Docks
It includes information about floating boat docks, floating bridge designs, anchorage systems, and devices that allow the dock to adjust itself to varying water levels....
-
A. Entry Doors
Do entry doors, connecting room doors, and interior doors (except doors to shallow closets) into and within all guestrooms and suites allow 32" clear passage width so persons who use wheelchairs...
-
806.2 Guest Rooms with Mobility Features
For example, closets in guest rooms must comply with the applicable provisions for storage specified in scoping....
-
11B-806.2 Guest rooms with mobility features
For example, closets in guest rooms must comply with the applicable provisions for storage specified in scoping. ◼...
-
A4.1.3(9)
A4.1.3(9) Supervised automatic sprinkler systems have built in signals for monitoring features of the system such as the opening and closing of water control valves, the power supplies for...
-
NSS Questions and Concerns
A revealing example: The Red Cross’s 2011 survey version asks regarding restroom grab bars: “Appropriate Grab Bars yes/no,” as compared to the DOJ questions which asks: “Is a horizontal...
-
1. Making Facilities Accessible and Usable
For example: A restroom may be modified to meet standard accessibility requirements (including wider door and stalls, and grab bars in specified locations) but it may be necessary to install...
-
F234 Residential Facilities
For example, grab bars do not have to be installed during the construction of residential dwelling units if the proper reinforcement is provided to facilitate their later installation as...
-
M305.3 Standing Supports (Section-by-Section Analysis)
In the MDE NPRM preamble, the Access Board noted that it was considering adopting the cross section dimensions for grab bars from the 2004 ADA and ABA Accessibility Guidelines and applying...
-
2010 ADA Standards
For example, if this document requires “1½ inches,” avoid specifying “1½ inches plus or minus X inches. ”Where the requirement states a specified range, such as in Section 609.4 where grab...
-
104.1.1 Construction and Manufacturing Tolerances
Where the requirement states a specified range, such as in Section 609.4 where grab bars must be installed between 33 inches and 36 inches above the floor, the range provides an adequate...
-
5.4.3 Transfer Support Height for M301 and M302
The minimum height is consistent with the information provided by Midmark Corporation on examination tableside rails, and the maximum height is generally consistent with the height of grab...
-
104.1.1 Construction and Manufacturing Tolerances
Where the requirement states a specified range, such as in 609.4 where grab bars must be installed between 33 inches and 36 inches above the floor, the range provides an adequate tolerance...
-
1 - Design and drawing
Tolerances do not apply where a requirement states a range; for example, that grab bars must be installed between 33 inches and 36 inches above the finished floor....
-
Preliminary Guidelines for SEWF Installation
Dump into place and apply the mixed Binder/EWF at a nominal 50% more (uncompacted) depth than the intended compacted thickness using a screed bar or rake. 2....
-
E. Restaurants and Concessions:
PSE shall continue to provide accessible tables, marked with the International Symbol for Accessibility, within the bar areas of the Red Bull Bar and Captain Morgan's Bar located in the...
