Provide a clear floor or ground space that is either 36 inches (914 millimeters) by 48 inches (1,220 millimeters) positioned for a forward approach or 30 inches (760 millimeters) by 60 inches...
Search Results "Teeing Ground"
Commonly Searched Documents
-
Trash, Recycling, and Other Essential Containers
- Carr Corporation Specimen Pass-through Cabinet: SPT-12
- Schindler 330A Low Rise Holeless Hydraulic Elevator
-
2. Follow the Accessibility Standards for Play Areas
Within the play area, the clear width of the ground level accessible routes shall be 60 inches minimum....
-
11B-404.2.7 Door and gate hardware
Operable parts of such hardware shall be 34 inches (864 mm) minimum and 44 inches (1118 mm) maximum above the finish floor or ground....
-
Passing Spaces [1016.4]
Also, consider providing a minimum clear width of 60 inches if the ORAR is a boardwalk or otherwise not at the same level as the adjoining ground surface or if the edge is bordered by timbers...
-
1017.4 Passing Spaces
clear tread width on trails or passing spaces at shorter intervals where the trail is heavily used or where the trail is a boardwalk or otherwise not at the same level as the adjoining ground...
-
1016.4 Passing Spaces
60 inches (1525 mm), where the route is: --Heavily used or adjoins elements, space, or facilities that are heavily used; or --A boardwalk or otherwise not at the same level as the ground...
-
11B-806.2.3 Sleeping areas
Exception: Where a single clear floor space complying with Section 11B-305 positioned for parallel approach is provided between two beds, a clear floor or ground space shall not be required...
-
811 Storage
Provisions of this section address clear floor or ground space (811.2), the height of storage elements (811.3), and operable parts, such as storage hardware (811.4)....
-
606.3 Height
Lavatories and sinks shall be installed with the front of the higher of the rim or counter surface 34 inches (865 mm) maximum above the finish floor or ground....
-
404.2.11 Vision Lights
EXCEPTION: Vision lights with the lowest part more than 66 inches (1675 mm) from the finish floor or ground shall not be required to comply with 404.2.11....
-
1017.9 Protruding Objects
However, entities should maintain the vertical clearance along the trail tread, resting intervals, and passing spaces free from tree branches for 80 inches high minimum above the ground....
-
1016.4 Passing Spaces
60 inches (1525 mm), where the route is: • Heavily used or adjoins elements, space, or facilities that are heavily used; or • A boardwalk or otherwise not at the same level as the ground...
-
11B-806.2.3 Sleeping areas
Exception: Where a single clear floor space complying with Section 11B-305 positioned for parallel approach is provided between two beds, a clear floor or ground space shall not be required...
-
11B-806.2.3 Sleeping areas
Exception: Where a single clear floor space complying with Section 11B-305 positioned for parallel approach is provided between two beds, a clear floor or ground space shall not be required...
-
106 Definitions
removed as unnecessary, in most cases due to changes in certain scoping or technical requirements: "accessible route," "area of refuge," "automatic door," "destination-oriented elevator," "ground...
-
1016.4.1 Size
Where the passing space is the intersection of two outdoor recreation access routes, the intersection must be as flat as possible so that all of the wheels of a mobility device touch the ground...
-
1016.9 Protruding Objects
entities should maintain the vertical clearance along outdoor recreation access routes, resting intervals, and passing spaces free from tree branches for 80 inches high minimum above the ground...
-
1016.4.1 Size
Where the passing space is the intersection of two outdoor recreation access routes, the intersection must be as flat as possible so that all of the wheels of a mobility device touch the ground...
-
A4.3.1(1) Travel Distances
This assumes a rate of about 1.5 ft/s (455 mm/s) on level ground. It also assumes that the traveler would move continuously....
-
1132A.9 Smooth surface
Swinging door or gate surfaces within 10 inches (254 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
-
1132A.9 Smooth surface
Swinging door or gate surfaces within 10 inches (254 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
- American Trails Resources and Library: Accessible Trails