mobility device can use to lift or transfer onto the play structure and leave the wheelchair or mobility device behind at ground level. 11 inches (280 mm) to 18 inches (455 mm) height...
Search Results "Shoulder Height"
Filters
Commonly Searched Documents
-
Transfer Platforms
-
703.3.1 Dimensions and Capitalization
two dots in the same cell 1 0.090 (2.3 mm) to 0.100 (2.5 mm) Distance between corresponding dots in adjacent cells 1 0.241 (6.1 mm) to 0.300 (7.6 mm) Dot height...
-
1002.5 Amusement Ride Seats Designed for Transfer
The proximity of the clear floor or ground space next to an element and the height of the element one is transferring to are both critical for a safe and independent transfer....
-
Ramp
The angle of the ramp varies as the second platform height changes and the ramp grows or shrinks in size so as to maintain a constant 8-inch gap between the two transfer steps....
-
11B-505.10.3 Bottom extension at stairs
The horizontal extension of a handrail shall be 12 inches (305 mm) long minimum and a height equal to that of the sloping portion of the handrail as measured above the stair nosings....
-
Permanently Installed Systems
Vertical wheelchair lifts are differentiated from elevators because they are limited in the height of their vertical lift, are not enclosed, and do not go through a floor level....
-
Bathroom Accommodating Reduced Ambulatory Mobility
“Comfort” height is easily used by tall people, wheelchair users, or older people with reduced upper body strength....
-
Kitchen Cabinets
Appliance garages at counter level to prevent lifting Wine rack usable by people of all heights and abilities (red wine is healthy!)...
-
FAQ: Why should I enter keywords in my Voices post?
For example, if you comment about carpet pile height and tag it with the keyword "Carpet," when other users search this keyword, they will see your post (if applicable, per your privacy...
-
Door and Gate Surfaces [§404.2.10]
Door and Gate Surfaces [§404.2.10] The bottom surface of doors and gates on the push side must be smooth to a height of at least 10”....
-
11B-1002.5 Amusement ride seats designed for transfer
The proximity of the clear floor or ground space next to an element and the height of the element one is transferring to are both critical for a safe and independent transfer....
-
11B-1002.5 Amusement ride seats designed for transfer
The proximity of the clear floor or ground space next to an element and the height of the element one is transferring to are both critical for a safe and independent transfer....
-
1. Transfer Supports
In the preamble to the MDE NPRM, the Access Board posed multiple questions about whether the final rule should include more specific requirements regarding location, length, size, height...
-
Executive Summary
However, Committee members failed to agree upon the recommended lowest or minimum height for adjustable-height transfer surfaces....
-
4.3.4 Industry Considerations in Designing Accessible Imaging Equipment
Today, it does not appear that any diagnostic imaging systems meet a minimum transfer height of 17” (see Sections 5 and 7)....
-
Jean Tessmer
Some of us prefer to mount to allow 28" knee clearance minimum to give the person in the wheelchair a lower shelf height of 32" depending on the thickness of your new #200 baby changer shelf...
-
1134A.6 Showers
The grab bar reinforcement shall be a minimum of 6 inches (152.4 mm) nominal in height. ...
-
Introduction
These dimensions include: thigh breadth, shoulder breadth, buttock-popliteal length, and wheelchair seat depth....
-
References
Scapular kinematics during transfers in manual wheelchair users with and without shoulder impingement. Clin Biomech (Bristol, Avon) 20: 32-40, 2005....
-
HEWI Push/Pull Handle set to EN 179
Push/pull handles are not only suitable as emergency exit devices, they also enable accessible ease of use at a variable gripping height....
-
703.3.1 Dimensions and Capitalization
0.090 (2.3 mm) to 0.100 (2.5 mm) Distance between corresponding dots in adjacent cells1 0.241 (6.1 mm) to 0.300 (7.6 mm) Dot height...
-
IV. Eligibility for Goods and Services
For example, an amusement park may impose height requirements for certain rides when required for safety....
-
Door and Gate Hardware
Section 404.2.7 also covers the operating characteristics and height of door and gate hardware....
-
703.3.1 Dimensions and Capitalization
two dots in the same cell 1 0.090 (2.3 mm) to 0.100 (2.5 mm) Distance between corresponding dots in adjacent cells 1 0.241 (6.1 mm) to 0.300 (7.6 mm) Dot height...
