(1) The lavatory and mirrors shall comply with 4.22.6. (2) If a cabinet is provided under the lavatory in adaptable bathrooms, then it shall be removable to provide the clearances...
Search Results "Residential Facility"
Filters
Commonly Searched Documents
-
4.34.5.3 LAVATORY, MIRRORS, AND MEDICINE CABINETS
-
1132A.3, Item 1
1. Doors shall not be less than 6 feet 8 inches (2032 mm) in height.
-
1133A.2.1, Item 1
1. U-shaped kitchens, designed with parallel approach at a range or cooktop located at the base of the U, shall have a minimum clear width of at least 60 inches (1524 mm). (See...
-
1133A.4, Item 3
3. Sinks and work surfaces may be a single integral unit a minimum of 60 inches (1524 mm) in length, or be separate components. Exception: Two 15-inch (381 mm) wide minimum...
-
1133A.7.1 Plumbing protection
Water supply and drain pipes under kitchen sinks shall be insulated or otherwise covered to protect against contact. There shall be no sharp or abrasive surfaces under kitchen sinks.
-
[F] 907.5.2.3.2 Groups R-1 and R-2.1
[F] 907.5.2.3.2 Groups R-1 and R-2.1. Group R-1 and R-2.1 dwelling units or sleeping units in accordance with Table 907.5.2.3.2 shall be provided with a visible alarm notification...
-
1010.1.7 Thresholds
Thresholds at doorways shall not exceed ¾ inch (19.1 mm) in height above the finished floor or landing for sliding doors serving dwelling units or ½ inch (12.7 mm) above the finished...
-
1133A.7.1 Plumbing protection
Water supply and drain pipes under kitchen sinks shall be insulated or otherwise covered to protect against contact. There shall be no sharp or abrasive surfaces under kitchen sinks.
-
[F] 907.5.2.3.2 Groups R-1 and R-2.1
Habitable spaces in dwelling units and sleeping units in Group R-1 and R-2.1 occupancies in accordance with Table 907.5.2.3.2 shall be provided with visible alarm notification....
-
11B-809.10.5.4 Bathtub enclosures
Doors and panels of bathtub enclosures shall be constructed from approved, shatter-resistant materials. Hinged doors shall open outward. Glazing used in doors and panels of bathtub...
-
11B-809.10.6.5 Thresholds
Where provided thresholds shall be 2 inches (51 mm) maximum in height and have a beveled or sloped angle not exceeding 1 unit vertical in 2 units horizontal (26.6 degrees from the...
-
11B-809.9.4 Work surfaces
Work surfaces shall be 36 inches (914 mm) maximum above the finish floor with minimum lengths at the following locations as required by this section: Linear length of 30...
-
Bobrick Recessed Heavy Duty Specimen Pass-Through Cabinet B-50517
Provides convenient passage for specimen from patient area to laboratory. Mounts in walls 11" thick with adjustable flange. Type 304 stainless steel, satin finish. ADA compliant...
-
American Specialties Recessed Specimen Pass-Through Cabinet 8154
Provides a convenient passage from patient-area into laboratory. Fabricated of 22 gauge type 304 satin-finish stainless steel. Internal latch prevents simultaneous door opening....
-
American Specialties Specimen Turntable Pass Box 0515
Fabricated of 18 gauge type 304 satin-finish stainless steel. Turntable cylinder is 12" (305 mm) diameter with 10 1/2" x 6" (270 x 150 mm) opening. Stainless steel self-lubricating...
-
Bobrick Recessed Heavy Duty Specimen Pass-Through Cabinet B-50516
Provides convenient passage for specimen from patient area to laboratory. Mounts in walls 7" thick with adjustable flange. Type 304 stainless steel, satin finish. ADA compliant...
-
Carr Corporation Specimen Pass Through SPT24
Two door stainless steel cabinet facilitates the collection of lab samples while maintaining patient privacy. Interlock prevents both doors opening at the same time. Smooth...
-
Carr Corporation Specimen Pass-through Cabinet: SPT-12
The Carr specimen pass through facilitates the collection of lab samples while maintaining patient privacy. It has two doors, one on each side. A door interlock system prevents...
-
Are accessible passenger loading zones required on sites where no passenger loading zone is intended?
Accessible passenger loading zones are required at these sites whether or not passenger loading zones are planned: parking facilities that provide valet parking, licensed medical care and...
-
Meet the GRIT Freedom Chair Trailblazers!
We're proud to introduce these ten amazing riders. Handpicked for their determination, spirit, and sense of adventure, these individuals show that grit comes in all shapes and sizes....
-
How to: wrap your levers
Changing out the color of your levers? This tutorial explains how to attach your new lever wraps.
-
Tips for riding the Freedom Chair
This short video covers some basic tips about riding the Freedom Chair. You'll learn how to use the levers for propulsion a special technique for climbing steep hills. We'll also...
-
Freedom Chair vs Regular wheelchair
One bridge, two very different experiences. The GRIT Freedom Chair is the most versatile all terrain wheelchair on the market today!
-
Freedom Chair at the beach
Move beyond the pavement and onto sandy beaches with the Freedom Chair. Loose sand is difficult but doable (like climbing a steep hill), and the packed sand by the water is easy to...
