Section 9.3.4 Provide adjustment of delay before key acceptance. 3. Section 9.3.5 Provide adjustment of same-key double-strike acceptance. 4....
Search Results "Adjustable Height Exam Table"
Filters
Commonly Searched Documents
-
502.4 Platform Accessibility Features
-
General [5.1]/ Access Aisles [5.3]
The required clear width (36 inches minimum) is specified for the clearance between the edges of fixed tables or between table edges and walls....
-
1132A.3 Width and height of interior doors and secondary exterior doors
Doors shall comply with the following:
-
1630.2(o)(1)(II)
(II) Modifications or adjustments to the work environment, or to the manner or circumstances under which the position held or desired is customarily performed, that enable a qualified individual...
-
Pictogram Field: ADA Standard Section 703.6.1
Pictograms shall have a field height of 6 inches (150 mm) minimum. Characters and braille shall not be located in the pictogram field....
-
4.3.4 Knee and Toe Clearances
.), but the combined knee and toe clearance depth required for an individual to bring their torso to the edge of a table or counter is not specified....
-
§1630.2(o)(1)(ii)
(ii) Modifications or adjustments to the work environment, or to the manner or circumstances under which the position held or desired is customarily performed, that enable an individual...
-
5.2 Cost Not Included:
5.2 Cost Not Included: The adjusted construction cost shall not include: • Project management fees and expenses. • Architectural and engineering fees....
-
Issue 1: APS volume
Volume adjustments differ by manufacturer: some devices can be set through a hand-held PDA, while others require adjusting set screws on a control board mounted in the pedestrian signal...
-
413.1.1 Caption Controls (Section-by-Section Analysis)
413.1.1 Caption Controls (Section-by-Section Analysis) This proposed section would require that, where video-capable hardware provides physical volume adjustment controls, such ICT must...
-
Receivers: ADA Standard Section 219.3
Section 219.3 covers scoping requirements in the current ADA Standards for receivers for assistive listening systems.
-
11B-235.2 Boat slips
Boat slips complying with Section 11B-1003.3.1 shall be provided in accordance with Table 11B-235.2....
-
What is Reasonable Accommodation?
Reasonable accommodation is any change or adjustment to a job or work environment that permits a qualified applicant or employee with a disability to participate in the job application process...
-
4.1.3(17)(a)
public pay telephones, public closed circuit telephones, or other public telephones are provided, then they shall comply with 4.31.2 through 4.31.8 to the extent required by the following table...
-
2. Updates to Functional Performance Criteria: 508 Standards and 255 Guidelines
left-hand column of the table) to its counterparts in existing 508 Standards § 1194.31 (in the middle column of the table) and existing 255 Guidelines §1193.41 (in the right-hand column...
-
11B-705.1.1.1 Dome size
warning surface shall have a base diameter of 0.9 inch (22.9 mm) minimum and 0.92 inch (23.4 mm) maximum, a top diameter of 0.45 inch (11.4 mm) minimum and 0.47 inch (11.9 mm) maximum, and a height...
-
GPK UPPERTONE Unassisted Muscle Strengthening System for Quadriplegics
This allows quads to make all necessary adjustments, such as station height, station width, and resistance, unassisted....
-
404.2.8.1 Door Closers and Gate Closers
Door closers and gate closers shall be adjusted so that from an open position of 90 degrees, the time required to move the door to a position of 12 degrees from the latch is 5 seconds minimum...
-
404.2.8.2 Spring Hinges
Door and gate spring hinges shall be adjusted so that from the open position of 70 degrees, the door or gate shall move to the closed position in 1.5 seconds minimum....
-
11B-404.2.8.1 Door closers and gate closers
Door closers and gate closers shall be adjusted so that from an open position of 90 degrees, the time required to move the door to a position of 12 degrees from the latch is 5 seconds minimum...
-
11B-404.2.8.1 Door closers and gate closers
Door closers and gate closers shall be adjusted so that from an open position of 90 degrees, the time required to move the door to a position of 12 degrees from the latch is 5 seconds minimum...
-
Scoping [4.1.2(6), 4.1.3(11)]
., patient exam rooms), then access is required to each toilet or bathroom....
-
Parking sign height measurement technique
502.6 says "Signs shall be 60 inches (1525 mm) minimum above the finish floor or ground surface measured to the bottom of the sign." But which floor or ground surface? The...
