Machinery Spaces (§203.5) Spaces used only by service personnel for maintenance, repair, or occasional monitoring of equipment Examples: elevator pits/ penthouses, mechanical/...
Search Results "Clear Pier Space"
Filters
Commonly Searched Documents
-
Machinery Spaces (§203.5)
-
12162(a)(3)(A)(ii) a number of spaces
(ii) a number of spaces...
-
Vertical Dispersion: ADA Standard Section 221.2.3.2
Section 221.2.3.2 covers scoping requirements in the current ADA Standards for vertical dispersion in assembly areas.
-
Maneuvering Space at Doors
Other commenters stated that the maneuvering space was necessary to ensure safe egress in cases of emergency. Response....
-
904.3.1 Aisle
Aisles shall comply with 403.
-
SECTION 1017 AISLES
SECTION 1017 AISLES [DSA-AC] In addition to the requirements of this section, means of egress, which provide access to, or egress from, buildings or facilities where...
-
11B-904.3.1 Aisle
Aisles shall comply with Section 11B-403.
-
904.3.1 Aisle
Aisles shall comply with 403.
-
E1-a
E1-a. Is there an accessible route, at least 36 inches wide, that connects the accessible entrance to all shelter areas (it may narrow to 32 inches wide for up to 2 feet in length)?...
-
904.3.1 Aisle
904.3.1 Aisle. Aisles shall comply with 403.
-
E1-1. Accessible Route
E1-1. Is there an accessible route, at least 36 inches wide that connects the accessible entrance to the voting area (the accessible route may narrow to 32 inches wide for up to 2...
-
SECTION 1018 AISLES
[See subsections ...]
-
11B-904.3.1 Aisle
Aisles shall comply with Section 11B-403.
-
SECTION 1018 AISLES
[See subsections ...]
-
11B-904.3.1 Aisle
Aisles shall comply with Section 11B-403.
-
Turning Space: ADA Standard Section 1010.1
A circular turning space 60 inches (1525 mm) diameter minimum with slopes not steeper than 1:48 shall be provided at shooting facilities with firing positions....
-
Handrails
The clear width between handrails must be between 33 and 38 inches. The handrail height must be between 34 and 38 inches to the top of the gripping surface....
-
11B-304 TURNING SPACE
[See subsections ...]
-
11B-304 Turning space.
[See subsections ...]
-
11B-304 Turning space
[See subsections ...]
-
503.2 Vehicle Pull-Up Space
Passenger loading zones shall provide a vehicular pull-up space 96 inches (2440 mm) wide minimum and 20 feet (6100 mm) long minimum....
-
503.2 Vehicle Pull-Up Space
Passenger loading zones shall provide a vehicular pull-up space 96 inches (2440 mm) wide minimum and 20 feet (6100 mm) long minimum. [ECTCR UFAS 4.6.5]...
-
General: ADA Standard Section 226.1
Section 226.1 of the ADA Standards covers information in the current ADA Standards on scoping requirements for dining surfaces and work surfaces.
-
807.2.1 Turning Space
Turning space complying with 304 shall be provided within the cell....