Suitable for R2010 fixed basin supports or for R2015 height adjustable basin supports. Materials: Cultured marble with a high-polished, pore-free sanitary gel coating....
Search Results "Support Rail"
Filters
Commonly Searched Documents
-
Pressailt Care MATRIX ANGLE Wash Basin with Overflow Right-Facing with Integrated Handrail
-
Retrofitting Kiosks
The Trace Center, NFB, and BBI supported a phased retrofit schedule such that 25 percent of all deployed kiosks must be accessible by 1 year, 50 percent by 3 years, 75 percent by 5 years...
-
Grab Bars
Grab bars must be perpendicular to the pool wall and extend the full width of the wall so a person can use them for support into the water....
-
Acknowledgments
Thanks to MTDC’s publication and photography staffs, especially Sunni Bradshaw, for technical support and to Deb Mucci for design drawings....
-
704.10 Vertical exposure
the roof construction has a fire-resistance rating of not less than 1 hour for a minimum distance of 10 feet (3048 mm) from the adjoining building and the entire length and span of the supporting...
-
C.3.ii. - Do vendors have to provide product documentation in alternate formats?
Section 1194.41 of the Access Board's standards provides that product support documentation that is provided to end-users must be made available in alternate format upon request....
-
4. Exception from the Requirements of M301 for Certain Examination Chairs that Comply with M302
The Access Board proposed in M101.2 in the MDE NPRM to require diagnostic equipment to meet the standards for each patient position supported, meaning that if diagnostic equipment was designed...
-
M301.2.1, M302.2.1 Transfer Height
height of the transfer surface shall have a lower height of 21" maximum and adjustable to a higher height of 25" minimum, measured from the floor to the uncompressed height of the patient support...
-
Landscape Forms Inc. Multiplicity Bench Collection
As in the backed bench, long seat boards are supported on the underside by steel straps to ensure stability and enable flat shipping....
-
SUPPLEMENTARY INFORMATION:
The final rule modifies the NPRM's approach to ensuring nondiscriminatory access to rail service by establishing a performance standard that passenger railroads would have to meet at new...
-
11B-404.2.7 Door and gate hardware
glazed doors without stiles, existing overhead rolling doors or grilles, and similar existing doors or grilles that are designed with locks that are activated only at the top or bottom rail...
-
11B-404.2.7 Door and gate hardware
glazed doors without stiles, existing overhead rolling doors or grilles, and similar existing doors or grilles that are designed with locks that are activated only at the top or bottom rail...
-
Covered Content on Primary Web Sites
Commenters who supported flexibility and carrier choice also expressed the view that fewer compliance options would inhibit carrier innovation and use of new technologies, limit Web site...
-
705 Detectable Warnings
It also required them at locations where pedestrian areas blend with vehicular areas without tactile cues, such as curbs or railings, and at reflecting pools....
-
F206.2.5 Restaurants and Cafeterias
Examples of "same decor" include, but are not limited to, seating at or near windows and railings with views, areas designed with a certain theme, party and banquet rooms, and rooms where...
-
404.2.10 Door and Gate Surfaces
Tempered glass doors without stiles and having a bottom rail or shoe with the top leading edge tapered at 60 degrees minimum from the horizontal shall not be required to meet the 10 inch...
-
505.6 Gripping Surface
walking surfaces with slopes not steeper than 1:20, the bottoms of handrail gripping surfaces shall be permitted to be obstructed along their entire length where they are integral to crash rails...
-
Summary
Furthermore, additional space may be needed to accommodate the task of transferring, depending on the additional features provided, e.g. armrests or railings....
-
R302.2 Components
Pedestrian street crossings and at-grade rail crossings complying with R302.3 through R302.7, and R306; 3....
-
404.2.10 Door and Gate Surfaces
Tempered glass doors without stiles and having a bottom rail or shoe with the top leading edge tapered at 60 degrees minimum from the horizontal shall not be required to meet the 10 inch...
-
505.6 Gripping Surface
walking surfaces with slopes not steeper than 1:20, the bottoms of handrail gripping surfaces shall be permitted to be obstructed along their entire length where they are integral to crash rails...
-
Reasonable Modification of Policies
Because the work on a regulatory evaluation concerning rail service accessibility has occurred before work has been completed on the regulatory evaluation of the reasonable modification...
-
11B-505.6 Gripping surface
walking surfaces with slopes not steeper than 1:20, the bottoms of handrail gripping surfaces shall be permitted to be obstructed along their entire length where they are integral to crash rails...
-
Gamco Surface-Mounted Robe Hook Satin - 76717
Flange and support arm shall be 22 gauge (0.8mm) and equipped with a concealed, 18-gauge (1.2mm) mounting bracket that is secured to a concealed, 19-gauge (1.0mm) wall plate with a stainless...
