Signs within parking and charging facilities shall comply with Section 11B-216.5.3....
Search Results "Rail Station Sign"
Filters
Commonly Searched Documents
-
11B-216.5.3 Parking and electric vehicle charging facilities
-
1005.3.2 Extended Ground or Deck Surface
The ground or deck surface shall extend 12 inches (305 mm) minimum beyond the inside face of the railing....
-
Surfaces (R302.7) (Section-by-Section Analysis)
Where pedestrian access routes cross rails at grade, the pedestrian access route must be level and flush with the top of the rail at the outer edges of the rails, and the surfaces between...
-
11B-303.5 Warning curbs
A warning curb is not required when a guard or handrail is provided with a guide rail centered 2 inches (51 mm) minimum and 4 inches (102 mm) maximum above the surface of the walk or sidewalk...
-
§ 37.47(e)
(e) A public entity wishing to apply for an extension of the July 26, 1993, deadline for key station accessibility shall include a request for an extension with its plan submitted to FTA...
-
R208.1 Where Required
Pedestrian at-grade rail crossings not located within a street or highway; 4....
-
Handrail
Handrail—A narrow railing to be grasped with the hand for support....
-
Measures and Procedures
The angle between the WMD and the transfer station is defined from 0°-180°....
-
A. Format and Organization
As noted previously, the formatting and organization of the 2016 Non-Rail Vehicle Guidelines differs significantly from the existing guidelines....
-
11B-216.9 TTYs
Identification and directional signs for public TTYs shall be provided in accordance with Section 11B-216.9....
-
11B-216.5.2 Electric vehicle charging spaces
Signs identifying Electric Vehicle Charging Spaces shall comply with Section 11B-812.8....
-
Stopping Distance
At the upstream acceleration station, participants were told in advance that at some point along the course they might be presented with a STOP sign, and if so, they were to stop as quickly...
-
§ 37.83(d)
(d) If a public entity operates a rapid or light rail system any segment of which is included on the National Register of Historic Places and if making a rapid or light rail vehicle of historic...
-
§ 37.73 Purchase or lease of used non-rail vehicles by public entities operating fixed route systems
[See subsections ...]
-
§ 37.71 Purchase or lease of new non-rail vehicles by public entities operating fixed route systems
[56 FR 45621, Sept. 6, 1991, as amended at 76 FR 57936, Sept. 19, 2011]
-
Eliason Corporation FP-ALU5R Heavy Duty Aluminum Mid-Panel Door
Additional options include a 10" ADA door bottom rail or 13" high bottom rail. Vertical stiles are 4 1/2" wide and have a recessed pocket to accept full 8" mortise locks....
-
T213.1 General
Seats on non-rail vehicles shall comply with T213....
-
T502.1 General
Doorways in non-rail vehicles shall comply with T502....
-
11B-502.6.1 Finish and size
Parking identification signs shall be reflectorized with a minimum area of 70 square inches (45,161 mm2)....
-
Track Crossing
The proposed rule required route surfaces to be level with the rail top, but permitted a 2 ½ inch gap at the inner edge of rails to accommodate wheel flanges (1003.2.7)....
-
11B-1005.2.1.1 Dispersion
Railings, guards, or handrails required to comply with Section 11B-1005.2.1 shall be dispersed throughout the fishing pier or platform. [2010 ADAS] Advisory 1005.2.1.1 Dispersion....
-
11B-1005.2.1.1 Dispersion
Railings, guards, or handrails required to comply with Section 11B-1005.2.1 shall be dispersed throughout the fishing pier or platform. Advisory 11B-1005.2.1.1 Dispersion....
-
Attachment I: Program Access in Existing Facilities
Attachment I: Program Access in Existing Facilities
-
T206.1 General
Circulation paths in non-rail vehicles shall comply with T302....
