Department of Justice's ADA Business Connection site at www.ada.gov; or, call the toll-free ADA Information Line: 800-514-0301 (voice); 800-514-0383 (TTY) www.ada.gov....
Search Results "Site Arrival Point"
-
Maintaining Accessibility in Museum Shops
-
Trails Are Not Outdoor Recreation Access Routes
An outdoor recreation access route is a continuous, unobstructed path designated for pedestrian use that connects pedestrian elements within a recreation site, such as a picnic area, camping...
-
11B-233.3.1.2.5 Multi-story residential dwelling units in buildings with no elevator
but not less than one of the ground floor multi-story residential dwelling units shall be calculated using the total number of multi-story residential dwelling units in buildings on a site...
-
SHOPPING CENTER (OR SHOPPING MALL)
A shopping center may include a series of buildings on a common site, connected by a common pedestrian access route on, above or below the ground floor, that is either under common ownership...
-
1129B.3, Item 2
[1991 ADAAG] 4.1.2 Accessible Sites and Exterior Facilities: New Construction. ...
-
4.Information, documentation, and training
WWW links used in this document ADAAG from the Access Board site (http://www.access-board.gov) Documents related to the April 2 FCC NPRM (http://trace.wisc.edu/world/telecomm/)...
-
233.3.2.1 Facilities Other Than Those Containing Emergency Transportable Housing Units, F233.3.2.1 Facilities Other Than Those Containing Emergency Transportable Housing Units, F233.4.2.1 Facilities Other Than Those Containing Emergency Transportable Housing Units
of 233.3.2.1 shall apply to the total number of residential dwelling units that are constructed under a single contract, or are developed as a whole, whether or not located on a common site...
-
Triggering event
prefabricated elements, such as modular buildings and amusement park rides and attractions, or installed equipment, such as ATMs, the start of construction means the date on which the site...
-
Triggering event. (Section-by-Section Analysis)
prefabricated elements, such as modular buildings and amusement park rides and attractions, or installed equipment, such as ATMs, the start of construction means the date on which the site...
-
Lines of Sight for Wheelchair Spaces
Such commenters pointed to practical complications in comparing viewing angles between wheelchair spaces and inaccessible seating. Response....
- Spinal Cord Injury Information Pages
-
Directional visual sign vs. room identification tactile sign
The arrow appears to indicate that this specific sign is a directional sign pointing toward the location of an accessible toilet room. ...
-
Reduced scoping for play areas and other recreation facilities. (Section-by-Section Analysis)
In response, no tipping point was identified....
-
1008.3 Transfer Systems
Designers should minimize the distance between the points where a child transfers from a wheelchair or mobility device and where the elevated play components are located....
-
Compartment Doors
Commenters also pointed out that the specified location should refer to the door opening, instead of the hinge. Response....
-
1008.3 Transfer Systems
Designers should minimize the distance between the points where a child transfers from a wheelchair or mobility device and where the elevated play components are located....
-
Verbalizing Directions
When giving directions, do not point. Instead, explain the directions in words and be specific. Be sure to use right and left as they apply to the person who is blind....
-
B.4.i. - What is assistive technology?
If the product doesn’t provide TTY functionality, it must provide a standard non-acoustic connection point for TTYs. See 36 CFR Part 1194.23....
-
4.10.7* Door and Signal Timing for Hall Calls
start to close shall be calculated from the following equation: T = D/(1.5 ft/s) or T = D/(445 mm/s) where T total time in seconds and D distance (in feet or millimeters) from a point...
-
4.10.7* DOOR AND SIGNAL TIMING FOR HALL CALLS
start to close shall be calculated from the following equation: T = D or T = D 1.5 ft/s 445 mm/s where T = total time in seconds and D = distance (in feet or millimeters) from a point...
-
1.1.7 Measurement of parking areas
This means that the overall slope in the long dimension should be measured along the center of the aisle or zone using the ends of the area as elevation measuring points and cross slope...
-
11B-411.2.1.2.3 Accessibility function button
The dots shall be spaced ¼ inch (6.4 mm), measured center to center, in the form of an equilateral triangle with a vertex pointing up....
-
Summary of significant issues raised by public comments in response to the NPRM Paperwork Reduction Act analysis and annual reporting burden estimate
TIA questioned the Board's estimates with respect to a contact point, citing the disparity between the Board's estimates for requests for a description of the accessibility and compatibility...
-
11B-104.1.1 Construction and manufacturing tolerances
All dimensions are subject to conventional industry tolerances except where the requirement is stated as a range with specific minimum and maximum end points....