[2010 ADAS] EXCEPTION: Existing or altered thresholds ¾ inch (19 mm) high maximum that have a beveled edge on each side with a slope not steeper than 1:2 shall not be required to comply...
Search Results "Platform Edge"
-
11B-404.2.5 Thresholds
-
11B-1009.2.3 Clear deck space
The space shall be 36 inches (914 mm) wide minimum and shall extend forward 48 inches (1219 mm) minimum from a line located 12 inches (305 mm) behind the rear edge of the seat....
-
11B-404.2.5 Thresholds
[2010 ADA Standards] EXCEPTION: Existing or altered thresholds ¾ inch (19 mm) high maximum that have a beveled edge on each side with a slope not steeper than 1:2 shall not be required...
-
11B-703.7.2.6.1 Men’s toilet and bathing facilities
An equilateral triangle, ¼ inch (6.4 mm) thick with edges 12 inches (305 mm) long and a vertex pointing upward, shall be located at entrances to men’s toilet and bathing facilities....
- Activar JL Industries Ambassador Series 1017F10 Steel Fire Extinguisher Cabinets
-
11B-106.5 Defined terms
OCCUPIABLE SPACE OPEN RISER OPERABLE PART PASSENGER ELEVATOR PATH OF TRAVEL PEDESTRIAN PEDESTRIAN WAY PERMANENT PERMIT PICTOGRAM PLACE OF PUBLIC ACCOMMODATION PLATFORM...
-
403.6 Handrails
Handrails provided in elevator cabs and platform lifts are not required to comply with the requirements for handrails on walking surfaces....
- AbleThrive
-
11B-903.4 Back support
Back support shall be 2½ inches (64 mm) maximum from the rear edge of the seat measured horizontally. [2010 ADAS] 903.4 Back Support....
-
11B-903.4 Back support
Back support shall be 2½ inches (64 mm) maximum from the rear edge of the seat measured horizontally. [2010 ADA Standards] 903.4 Back Support....
-
Stabilizer
The segment contains timber edging. The Stabilizer is applied to a base of 3 inches of compacted native soils....
- BraunAbility Century 2 Wheelchair Lift for School Buses, Cutaway Buses, and Paratransit Vans
-
§ 37.42(e)(2)
., where such a clearance would create an insurmountable gap on a mini-high platform or where the physical structure of an existing station does not allow such clearance), barriers must...
-
§ 37.42(e)(2)
., where such a clearance would create an insurmountable gap on a mini-high platform or where the physical structure of an existing station does not allow such clearance), barriers must...
-
Attachment I
Provide a mirror with the bottom edge of its reflecting surface no more than 40 inches above the finished floor. Standards §§ 4.1.6(1)(b), 4.1.3(11), 4.22.6, 4.19.6....
-
EXHIBIT B
dimensions employed shall be: (1) average eye height for a person sitting in a wheelchair is 47.45"; (2) horizontal distance from the eye of an average person sitting in a wheelchair to the edge...
-
Recessed Objects
If located to provide, but not exceed this clearance (27” above the floor or ground absolute), they are not protruding objects because the leading edge will be within cane detection....
-
503.2 User Preferences (Section-by-Section Analysis)
503.2 User Preferences (Section-by-Section Analysis) This section proposes that applications must permit user preferences to carry over from platform settings for text color, contrast...
-
11B-403.6 Handrails
Handrails provided in elevator cabs and platform lifts are not required to comply with the requirements for handrails on walking surfaces....
-
11B-403.6 Handrails
Handrails provided in elevator cabs and platform lifts are not required to comply with the requirements for handrails on walking surfaces....
- Activar JL Industries Cosmopolitan Series 2035S21 Stainless Steel Fire Extinguisher Cabinet
-
Opening Force [§404.2.9]
When using door gauges and other measuring devices, it is advisable to follow these steps (except where product instructions specify otherwise): Open the door so that the face edge...
-
1.1.13 Flatness of ramp running slope
Each line should be approximately 6 in. (150 mm) from the inside (ramp side) edge of the handrail....
-
3001.3 Accessibility
Passenger elevators and platform (wheelchair) lifts required to be accessible by Chapter 11A or 11B shall conform to Chapter 11A for applications listed in Section 108.2.1.2 regulated by...