Section 602.6 covers the current ADA Standards for the drinking fountain water flow.
Search Results "Wet Location"
Commonly Searched Documents
-
Water Flow: ADA Standard Section 602.6
-
11B-812.7.1 Location
aisles at vehicle spaces shall not overlap the vehicular way and may be placed on either side of the vehicle space they serve except for van accessible spaces which shall have access aisles located...
-
11B-602.6 Water flow
The spout shall provide a flow of water 4 inches (102 mm) high minimum and shall be located 5 inches (127 mm) maximum from the front of the unit....
- 604.5.2 Rear Wall Grab Bar Location
-
11B-604.5.1 Side wall
The side wall grab bar shall be 42 inches (1067 mm) long minimum, located 12 inches (305 mm) maximum from the rear wall and extending 54 inches (1372 mm) minimum from the rear wall with...
-
T213.1 General
Seats on non-rail vehicles shall comply with T213.
-
Number and Location: ADA Standard Section 221.2.1
Section 221.2.1 covers scoping requirements in the current ADA Standards for the number and location of wheelchair spaces.
-
Entry Points and Seats
When play components are located on an accessible route, the height required to transfer directly to the entry point or seat of a play component has a minimum of 11 inches (280 mm) and a...
- Figure 1009.5.7 Grab Bars – Drawing from the U.S. Access Board
- Figure 1009.4.5 Grab Bars for Transfer Walls – Drawing from the U.S. Access Board
-
11B-812.7.1 Location
aisles at vehicle spaces shall not overlap the vehicular way and may be placed on either side of the vehicle space they serve except for van accessible spaces which shall have access aisles located...
-
Spacing: ADA Standard Section 609.3
Section 609.3 covers the current ADA Standards for the grab bar spacing between the wall, objects above, below and at the ends of the grab bar.
-
Mounting Height and Location
Section 703.4 covers the mounting height and location of signs with tactile characters....
-
Can van spaces required for a parking garage be located in a surface lot instead?
Accessible parking, including van spaces, required for one parking facility can be located in another parking facility only where it results in substantially equal or greater access and...
-
4.6.1 General
Where telescopes or periscopes are provided, no fewer than two telescopes or periscopes shall be provided at each distinct viewing location in a viewing area....
-
11B-606.2 Clear floor space
A parallel approach complying with Section 11B-305 shall be permitted to a kitchen sink in a space where a cook top or conventional range is not provided and to wet bars. 2. Reserved...
-
1009.5.7 Grab Bars
Grab bars shall comply with 609 and be located on at least one side of the transfer system. The grab bar located at the transfer platform shall not obstruct transfer....
-
1009.5.7 Grab Bars
Grab bars shall comply with 609 and be located on at least one side of the transfer system. The grab bar located at the transfer platform shall not obstruct transfer....
-
11B-1009.5.7 Grab bars
Grab bars shall comply with Section 11B-609 and be located on at least one side of the transfer system. The grab bar located at the transfer platform shall not obstruct transfer....
-
11B-1009.5.7 Grab bars
Grab bars shall comply with Section 11B-609 and be located on at least one side of the transfer system. The grab bar located at the transfer platform shall not obstruct transfer....
-
11B-1009.5.7 Grab bars
Grab bars shall comply with Section 11B-609 and be located on at least one side of the transfer system. The grab bar located at the transfer platform shall not obstruct transfer....
-
1009.5.7 Grab Bars
Grab bars shall comply with 609 and be located on at least one side of the transfer system. The grab bar located at the transfer platform shall not obstruct transfer....
-
208.3.2 Residential Facilities, F208.3.2 Residential Facilities
In facilities containing residential dwelling units required to provide mobility features complying with 809.2, parking spaces provided in accordance with 208.2.3.1 shall be located on the...
-
11B-703.4.1 Height above finish floor or ground
Tactile characters on signs shall be located 48 inches (1219 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest Braille cells and 60 inches (1524...