FEATURES: Precise slope and angle measurements for metal fabricators, commercial carpenters, plumbers, etc......
Search Results "Sloped Entry"
Filters
Commonly Searched Documents
-
Stabila, Inc. Magnetic Tech Digital Electronic Level Type 96M-2
-
R304.5.4 Counter Slope
R304.5.4 Counter Slope. The counter slope of the gutter or street at the foot of curb ramp runs, blended transitions, and turning spaces shall be 5 percent maximum....
-
Cross Slope [1017.7.2]
Cross slope is the side-to-side slope of a trail tread....
-
Section 2. Slope
"Slope" means the relative steepness of the land between two points and is calculated as follows: The distance and elevation between the two points (e.g., an entrance and a passenger loading...
-
Methods for Placing a Slope Tool on the Surface
There are several methods that can be used for measuring slopes and cross slopes with a digital slope meter. Each method has advantages and disadvantages....
-
2.4 Slope
The running slope (grade) and cross slope of ORARs shall comply with section 2.4. ...
-
11B-1002.4.5 Ride entry
Openings providing entry to wheelchair spaces on amusement rides shall be 32 inches (813 mm) minimum clear....
-
11B-1002.4.5 Ride entry
Openings providing entry to wheelchair spaces on amusement rides shall be 32 inches (813 mm) minimum clear....
-
11B-1002.4.5 Ride entry
Openings providing entry to wheelchair spaces on amusement rides shall be 32 inches (813 mm) minimum clear....
-
M-D Building Products, Inc. GEN3 SmartTool™ Digital Level
shows orientation for next step with the word “UP” Takes less than 2 minutes Five Instant Angle Conversion Modes Degrees - Machine set-up, pipe bending, saw set-up Percent Slope...
-
1002.4.4.2 Side Entry
Advisory 1002.4.4.2 Side Entry. The amount of clear space needed within the ride, and the size and position of the opening are interrelated....
-
1002.4.4.2 Side Entry
Advisory 1002.4.4.2 Side Entry. The amount of clear space needed within the ride, and the size and position of the opening are interrelated....
-
Tread Surface: ADA Standard Section 504.4
Section 504.4 covers the current ADA Standards for the tread surfaces on stairways.
-
1015.6 Slope
The slope of the surface of clear ground spaces and turning spaces shall not be steeper than 1:48 in any direction....
-
1015.6 Slope
The slope of the surface of clear ground spaces and turning spaces shall not be steeper than 1:48 in any direction....
-
4.7.3 Slope
The slope of the clear floor or ground spaces required by section 4.0 shall not exceed 1:48 (2 percent) in any direction. Exception....
-
3.2.4 Slope
The ground surface in all camp living areas shall have a slope of no more than 1:48 (2 percent) in any direction. Exception....
-
1016.7 Slopes
The slopes of outdoor recreation access routes shall comply with 1016.7....
-
1016.7 Slopes
The slopes of outdoor recreation access routes shall comply with 1016.7....
-
Cross Slope
Cross Slope. The slope that is perpendicular to the direction of travel (see running slope)....
-
Running Slope
Running Slope. The slope that is parallel to the direction of travel (see cross slope)....
-
Overview
Large pools must have two accessible means of entry, with at least one being a pool lift or sloped entry; smaller pools are only required to have one accessible means of entry, provided...
-
RUNNING SLOPE
RUNNING SLOPE. The slope that is parallel to the direction of travel. (As differentiated from the definition of “Cross Slope”.)...
-
C. Parking Slope
Do the parking spaces and access aisles have surface slopes less than 1:50 (i.e.: when measured as shown on the Tools & Techniques page , is the critical dimension 1/2" or less)?...
