Accessible routes serving recreational boating facilities, including gangways and floating piers, shall comply with Chapter 4 except as modified by the exceptions in 1003.2....
Search Results "Recreational Surfacing"
Filters
Commonly Searched Documents
-
Accessible Routes: ADA Standard Section 1003.2
-
Floor and Ground Surfaces
This guide explains requirements in the ADA Standards for floor and ground surfaces. ...
-
11B-1003.2 Accessible routes
Accessible routes serving recreational boating facilities, including gangways and floating piers, shall comply with Division 4 except as modified by the exceptions in Section 11B-1003.2....
-
T302.4 Surface Discontinuities
Surface discontinuities shall be ½ inch (13 mm) high maximum and shall be beveled with a slope not steeper than 1:2. EXCEPTIONS: 1....
-
1015.5 Surface
This section requires the surface of the clear ground space and turning space to be firm and stable....
-
Wheelchair Spaces in Amusement Rides: ADA Standard Section 1002.4
Wheelchair spaces in amusement rides shall comply with 1002.4.
-
Clearances: ADA Standard Section 1002.4.4
Clearances for wheelchair spaces shall comply with 1002.4.4. EXCEPTIONS: 1. Where provided, securement devices shall be permitted to overlap required clearances. 2. Wheelchair...
-
11B-1002.4 Wheelchair spaces in amusement rides
Wheelchair spaces in amusement rides shall comply with Section 11B-1002.4.
-
11B-1002.4.4 Clearances
Clearances for wheelchair spaces shall comply with Section 11B-1002.4.4. Exceptions: Where provided, securement devices shall be permitted to overlap required...
-
11B-1002.4.4.2 Side entry
Where wheelchair spaces are entered only from the side, amusement rides shall be designed to permit sufficient maneuvering clearance for individuals using a wheelchair or mobility...
-
Check Writing Surfaces: ADA Standard Section 904.3.3
Where provided, check writing surfaces shall comply with 902.3....
-
11B-505.8 Surfaces
Handrail gripping surfaces and any surfaces adjacent to them shall be free of sharp or abrasive elements and shall have rounded edges....
-
Outdoor Recreation Access Routes at Trailheads [F247.3.2]
At least one outdoor recreation access route (ORAR) must connect the following at trailheads: Accessible parking spaces or other arrival points The starting point of the...
-
Utilities at Recreation Sites
major constructed features at the recreation area by an outdoor recreation access route and ensure they meet the following requirements....
-
SafeLane® Surface Overlay in Action
Protecting people, roads and infrastructure, SafeLane® surface overlay from Cargill Deicing Technology is the only pavement overlay with anti-icing capabilities....
-
Pilot Rock FSDW-30 Campfire Ring
Model FSDW-30/18/TB accessible campfire ring offers a full-height outer ring as a heat barrier for the inner ring. One inch diameter draft holes feed air into the space between the...
-
Pilot Rock LDW-36/18 Campfire Ring
Accessible campfire ring Model LDW-36/18/TB includes a full-height outer ring to serve as a heat barrier for the inner ring. It also features a 300 sq. inch 4-level adjustable...
-
Pilot Rock FSWDW-30 Campfire Ring
Series Overview Model FSWDW-30/18/TB accessible campfire ring offers a full-height outer ring as a heat barrier for the inner ring. One inch diameter draft holes feed air into...
-
3.2.3 Surface
The ground surface in all camp living areas shall be firm and stable. The type of surface should be appropriate to the setting and level of development....
-
Performance for Surface Firmness and Stability
Performance for Surface Firmness and Stability Table 1 identifies the 11 test surface materials, the dates of installation, and the date of the initial and final testing of surfaces at...
-
F246.4 Outdoor Recreation Access Routes
This section requires at least one outdoor recreation access route to connect accessible parking spaces or other site arrival points serving the viewing area with accessible elements, spaces...
-
11B-306.3.4 Clearance reduction
Exception: The knee clearance shall not be reduced at built-in dining and work surfaces required to be accessible by Section 11B-226.1....
-
Surface [1017.2]
The surfaces of trails, passing spaces, and resting intervals must be firm and stable. A firm trail surface resists deformation by indentations....
-
Protruding Objects and Outdoor Recreation Access Routes
that are between 27 inches (685 millimeters) and 80 inches (2,030 millimeters) above the travel surface....
