[ADA Stds. 9.2.2(1)] Yes __ No __ N/A __ Comments: _____________________________________ ... is there clear passage at the foot of each bed that is at least 36" wide so that persons...
Search Results "Foot-Candle"
-
J. Bedside Clearance
-
Exhibit B
Exhibit B RELEASE OF ADA CLAIMS For and in consideration of the acceptance of relief offered to me by Associated Foot & Ankle Centers of Northern Virginia (“AFAC”) pursuant to...
-
11B-812.10.4 Location
Where the long dimension of a vehicle space is parallel to the vehicular way, the EV charger shall be adjacent to, and 48 inches (1219 mm) maximum from the head end or foot end of the vehicle...
-
Magnuson Group CLM Series Coat Rack
Available in 2, 3, or 4 foot lengths....
-
11B-233.3.1.2.6.3 Test number two, site analysis test
The analysis of the existing slope (before grading) shall be done on a topographic survey with 2 foot (610 mm) contour intervals with slope determination made between each successive interval...
-
11B-233.3.1.2.6.3 Test number two, site analysis test
The analysis of the existing slope (before grading) shall be done on a topographic survey with 2 foot (610 mm) contour intervals with slope determination made between each successive interval...
-
Features of Accessible Exam Tables
alongside table is critical for transfer 9.Positioning and support aids, such as wedges and rolled up blankets, should be available 10.Exam surface extensions, such as head and foot...
-
5.3.2.1 Transfer Sides Recommendation for Stretchers
The location of the transfer side is on the patient right or left roughly midway between the two ends (head and foot)....
-
Head and Back Support (M301.3.3 and M302.3.3)
., for the head, neck, back, lumbar region, leg, knee, and foot, as appropriate) to support patients in various postures and body positions in a manner that optimizes their comfort.”...
-
ASTM
When a surface is tested it must have an average work per foot value for straight propulsion and for turning less than the average work per foot values for straight propulsion and for turning...
-
ASTM
When a surface is tested it must have an average work per foot value for straight propulsion and for turning less than the average work per foot values for straight propulsion and for turning...
-
Location
For graphics showing APS at corners with 10 foot and 30 foot radii and various types of curb ramps, see the curb ramp library, Chapter 6, in Special Report: Accessible Public Rights-of-Way...
-
M305.4 Leg Supports (Section-by-Section Analysis)
The Committee referenced ANSI/AAMI HE75 which recommends that “[f]or patients with limited leg strength and control, instead of stirrups that support only the foot and require active user...
-
Elevator Exemption
The 500 square foot maximum was based on a floor area allowance of 100 square feet per occupant, which is consistent with model building code requirements for business and industrial occupancies...
-
M301.3.3 Head and Back Support
., for the head, neck, back, lumbar region, leg, knees, and foot, as appropriate) to support patients in various postures and body positions in a manner that optimizes their comfort....
-
11B-812.10.4 Location
Where the long dimension of a vehicle space is parallel to the vehicular way, the EV charger shall be adjacent to, and 48 inches (1219 mm) maximum from the head end or foot end of the vehicle...
-
1132A.3 Width and height of interior doors and secondary exterior doors
A nominal 32-inch (813 mm) clear opening provided by a standard 6-foot wide (1829 mm) sliding patio door assembly is acceptable. ...
-
1003.3.2 Boarding Pier Clearances
For example, at a launch ramp, if a 20 foot (6100 mm) long accessible boarding pier is provided, the entire 20 feet (6100 mm) must comply with the pier clearance requirements in 1003.3....
-
Soiltac Liquid Mix-In
It was only slightly soft under foot, showing footprint indentations, but seemed to firm back up. There were no noticeable drainage issues for this surface....
-
11B-1003.3.2 Boarding pier clearances
For example, at a launch ramp, if a 20 foot (6100 mm) long accessible boarding pier is provided, the entire 20 feet (6100 mm) must comply with the pier clearance requirements in 1003.3....
-
Ronick Matting Systems BaseMat 300 Entrance Floor Mat
The BaseMat is designed for heavy foot traffic by removing soil with scraping action and then retaining....
-
Getting Started
Do they arrive on foot or do they take public transportation?...
-
11B-604 Water closets and toilet compartments
INTERPRETATION Showers are fixtures including a 30 inch x 60 inch clear receptor with a minimum/maximum slope of ¼ inch per foot to a drain (refer to CPC Section 408.5 and CBC Section...
