Requirements in 4.5 apply to accessible routes and spaces, including ramps, elevators, platform lifts, and clear floor space....
Search Results "Floor Surface"
Filters
Commonly Searched Documents
-
Scoping [4.1.2(4), 4.1.3(3)]
-
11B-403.3 Slope
The running slope of walking surfaces shall not be steeper than 1:20. The cross slope of walking surfaces shall not be steeper than 1:48....
-
Surface and Size [§305.2 and §305.3]
Surface and Size [§305.2 and §305.3] Clear floor spaces must meet requirements for ground and floor surfaces, including criteria for firmness, stability, and slip resistance....
-
Inpro Corporation JointMaster® 806 Series Floor Expansion Joint Covers
Designed for uneven slab conditions Pre-drilled counter-sunk holes for easy installation Applicable for existing conditions, additions and new construction Anti-slip surface...
-
Miracle Sealant Slip-Resistant Flooring Treatment
professional grade penetrating sealer designed for the slip-protection of all ceramic tile, porcelain tile, polished marble, polished granite, concrete, masonry and other acid sensitive surfaces...
-
11B-306.2.3 Minimum required depth
Where toe clearance is required at an element as part of a clear floor space, the toe clearance shall extend 17 inches (432 mm) minimum under the element....
-
Clear Floor Space: ADA Standard Section 611.2
Section 611.2 covers the current ADA Standards for the clear floor space at washing machines and clothes dryers.
-
302.2 Carpet
Exposed edges of carpet shall be fastened to floor surfaces and shall have trim on the entire length of the exposed edge. Carpet edge trim shall comply with 303....
-
302.2 Carpet
Exposed edges of carpet shall be fastened to floor surfaces and shall have trim on the entire length of the exposed edge. Carpet edge trim shall comply with 303....
-
302.2 Carpet
Exposed edges of carpet shall be fastened to floor surfaces and shall have trim on the entire length of the exposed edge. Carpet edge trim shall comply with 303....
-
Eco-Grip Flooring Video 1 of 8 Welcome and Subfloor Preparation
Eco-Grip Flooring Subfloor Preparation...
-
Eco-Grip Flooring Video 4 of 8 Routing and Heat Welding
Eco-Grip Flooring Routing and Heat Welding...
-
Eco-Grip Flooring Video 5 of 8 Inside and Outside Corners
Eco-Grip Flooring Inside and Outside Corner Installation...
-
11B-408.4.2 Floor surfaces
Floor surfaces in elevator cars shall comply with Sections 11B-302 and 11B-303....
-
11B-408.4.2 Floor surfaces
Floor surfaces in elevator cars shall comply with Sections 11B-302 and 11B-303....
-
11B-408.4.2 Floor surfaces
Floor surfaces in elevator cars shall comply with Sections 11B-302 and 11B-303....
-
5.1.7 Surface
The surface of the clear ground space shall be firm and stable. ...
-
Eco-Grip Flooring Video 7 of 8 Drain Detail and Base Trim
Eco-Grip Flooring Drain Detail and Base Trim...
-
Door and Gate Surfaces: ADA Standard Section 404.2.10
Section 404.2.10 covers the current ADA Standards for door and gate surfaces on manual doors and gates.
-
11B-405.4 Floor or ground surfaces
Floor or ground surfaces of ramp runs shall comply with Section 11B-302. Changes in level other than the running slope and cross slope are not permitted on ramp runs....
-
4.1.3(3)
(3) Ground and floor surfaces along accessible routes and in accessible rooms and spaces shall comply with 4.5....
-
4.1.2(3)
(3) Ground and floor surfaces along accessible routes and in accessible rooms and spaces shall comply with 4.5....
-
Inpro Corporation JointMaster® 101 Series Floor Expansion Joint Covers
The 101 Series is adaptable to many flooring finishes, including ceramic tile, marble, stone, vinyl, tile and carpet....
-
Slip Resistance
Some flooring products are labeled with a slip resistance rating based on a laboratory test procedure....
