EXCEPTION: Where the surface is other than concrete, asphalt, or boards, cross slopes not steeper than 1:20 shall be permitted when necessary for drainage....
Search Results "Floor Surface"
Filters
Commonly Searched Documents
-
1018.8.2 Slope
-
10.3.1(7)*
Gates which must be pushed open by wheelchair or mobility aid users shall have a smooth continuous surface extending from 2 inches above the floor to 27 inches above the floor and shall...
-
11B-703.4.2 Location
Signs containing tactile characters shall be located so that a clear floor space of 18 inches (457 mm) minimum by 18 inches (457 mm) minimum, centered on the tactile characters, is provided...
-
§ 38.57(c)
(c) The diameter or width of the gripping surface of handrails and stanchions shall be 11/4 inches to 11/2 inches or provide an equivalent gripping surface and shall provide a minimum 11...
-
4.3.3 Slope
When the surface is not paved or is not elevated above the natural ground, slopes not steeper than 1:33 (3 percent) shall be permitted where necessary for drainage. ...
-
4.35.4 Bench
The bench shall be mounted 17 in to 19 in (430 mm to 485 mm) above the finish floor....
-
Boston Center for Independent Living, Inc.
Boston Center for Independent Living, Inc. 60 Temple Place, 5th Floor, Boston, MA 02111-1324 617 338-6665 (Voice) 617 338-6662 (TTY) 617 338-6661 (Fax) 866 338-8085 (Toll Free) info@...
-
Single-User Toilet Rooms: Side Transfer Space
Clear floor space at water closets at least 60 inches wide allows room for side transfers. Lavatories can abut this space (or overlap it as shown on page 89)....
-
11B-809.10.6.3 Floor space
A clear maneuvering space 30 inches (762 mm) wide minimum by 48 inches (1219 mm) minimum in length shall be located outside the shower, with the width flush with the control wall and...
-
606.2 Clear Floor Space
A clear floor space complying with 305, positioned for a forward approach, and knee and toe clearance complying with 306 shall be provided. EXCEPTIONS: 1....
-
Sears Brands, LLC Craftsman 24 in. Digital LaserTrac® Level
Description Item # 00948293000P Model # 48293 The Craftsman 24-in. Digital LaserTrac Level Means You Never Miss a Cut The Craftsman 24-in. digital LaserTrac level clearly...
-
M-D Building Products, Inc. GEN2 SmartTool™ Digital Level
Dependable, Accurate, Measures All Angles. Directional beep Guides you to your angle so you don’t have to see the level Beep rate increases as angle is...
-
10.3.1(9)
(9) In stations covered by this section, rail-to-platform height in new stations shall be coordinated with the floor height of new vehicles so that the vertical difference, measured when...
-
1018.10 Dune Crossings
The curbs or barriers shall prevent the passage of a 2 inch (50 mm) diameter sphere, where any portion of the sphere is within 2 inches (50 mm) of the crossing surface....
-
1018.10 Dune Crossings
The curbs or barriers shall prevent the passage of a 2 inch (50 mm) diameter sphere, where any portion of the sphere is within 2 inches (50 mm) of the crossing surface....
-
M301.2.1 Height
The height of the transfer surface during patient transfer shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum measured from the floor to the top of the transfer surface....
-
Forward Approach
For wheelchair access, the proposed rule required a forward approach at cantilevered units but allowed a parallel approach at other types of units, such as those that are floor mounted....
-
How to Use this Checklist
Obtain Floor Plan or Make Sketch A floor plan helps the surveyors to get organized and to know how many elements there are, such as entrances and toilet rooms. ...
-
11B-606.2 Clear floor space
11B-606.2 Clear floor space....
-
AccessRec GrassProtecta Slip Resistant Grass Reinforcement Mesh
Access Mat GRASSPROTECTA® by AccessRec, LLC. slip resistant grass reinforcement mesh is an improved lightweight heavy duty thick polyethylene grid for reinforcing and protecting grassed surfaces...
-
Medical Diagnostic Equipment Accessibility Standards Sub Committee Recommendations Stretcher Final Report
Equipment Features Addressed in Technical Criteria Types Of Equipment To Which Technical Criteria Applies Supine, prone, or side-lying position (M301) Transfer surface...
-
5.1.3 Transfer Surface Low Height Options for M301 and M302
5.1.3 Transfer Surface Low Height Options for M301 and M302 The Committee did not agree on a final low height recommendation....
-
Smith System Husky Clover Activity Table
The cutouts in the table top give the student a sense of place. The friendly, colorful tubular legs and nylon glides make a welcoming statement. This table is built to withstand...
