Search Results "Fixed Assembly Seating"
- American Standard Madera 1.6 gpf ADA EverClean Toilet with Exposed Manual Flush Valve System Side View
-
TOTO Drake® Two-Piece Toilet, 1.6 GPF, ADA Compliant, Elongated Bowl
Requires the Premium User plan or above. (Login or upgrade your account!)
-
Mansfield Toilet Erie Commercial Package CP-1301
Requires the Premium User plan or above. (Login or upgrade your account!)
-
Transfer Sides (M301.2.3 and M302.2.3)
The 2004 ADA and ABA Accessibility Guidelines provide a gap of 3 inches between the edge of a shower seat and the shower compartment entry, and the gap does not appear to interfere with...
-
711.4.1.1 Fire-resistance-rated assemblies
Penetrations shall be installed as tested in the approved fire-resistance-rated assembly....
-
711.3.1.1 Fire-resistance-rated assemblies
Penetrations shall be installed as tested in an approved fire-resistance-rated assembly....
-
1018.2 Aisles in assembly spaces
Aisles and aisle accessways serving a room or space used for assembly purposes shall comply with Section 1029....
- Access Board: Alternate Type Roll In Shower Stalls
-
Re: American Standard AccessPRO Toilet
Production of the American Standard AccessPRO Toilet was discontinued, and the manufacturer says there is no replacement fixtures offered that provides ability to move laterally as...
-
Re: American Standard AccessPRO Toilet
Thanks for the heads up, Jonathan! We’ll be on the lookout for the Toto.
-
Willoughby Industries WRS-BF-FA Front Mounted Recessed ADA Shower Panel With Hand Held Flexshower Head
Requires the Premium User plan or above. (Login or upgrade your account!)
- Simplified Building Concepts: Assembling the ADA Railing
-
Other Requirements in the ADA Standards
Non-fixed elements, such as fire extinguishers, are not subject to the ADA Standards. ...
-
M302.4.2 Clearance Around Base
The base of the diagnostic equipment shall provide a clearance 6 inches (150 mm) high minimum measured from the floor and 36 inches (915 mm) deep minimum measured from the edge of...
-
5.8.2.1 Height of Breast Platform at Time of Measurement
5.8.2.1 Height of Breast Platform at Time of Measurement Recommendation The Committee recommends measuring all knee and toe clearances when the top of the breast platform is set...
-
5.8.2.1 Height of Breast Platform At Time of Measurement
5.8.2.1 Height of Breast Platform At Time of Measurement. All knee and toe clearances should be measured when the top of the breast platform is set at 34 inches above the floor.
-
Chapter 2: Methodology
[See subsections ...]
-
M302.4.2 Clearance Around Base
The base of the equipment shall provide a clearance 6 inches (150 mm) high minimum measured from the floor and 36 inches (915 mm) deep minimum measured from the edge of the...
- Bradley Fixed Tilt Mirror with Shelf 7405
-
711.4.3 Nonfire-resistance-rated assemblies
Penetrations of horizontal assemblies without a required fire-resistance rating shall meet the requirements of Section 707 or shall comply with Sections 711.4.3.1 through 711.4.3.2....
-
Lift Compatibility (M301.4 and M302.4)
M301.4 and M302.4 would require diagnostic equipment used by patients in a supine, prone, or sidelying position, and diagnostic equipment used by patients in a seated position to be usable...
-
§ 36.302(f)(4) Notification of accessible seating locations
(4) Notification of accessible seating locations. ...
- Access Board: Standard Roll In Shower Stalls
-
Appendix 2- Photos of Participants in the IDEA Center Research
Appendix 2- Photos of Participants in the IDEA Center Research Examples of High Seats: Examples of Very Large and Small Clear Floor Area Widths: Examples of Very Long...