Section 201.2 covers the application of the most current requirements based on the building or facility use.
Search Results "Plumbing Element"
Commonly Searched Documents
-
Application Based on Building or Facility Use: ADA Standard Section 201.2
-
11B-703.2.7 Character spacing
Characters shall be separated from raised borders and decorative elements 3/8 inch (9.5 mm) minimum....
-
11B-707 Automatic teller machines, fare machines and point-of-sale devices
However, for entities covered by the ADA, the Department of Justice regulations that implement the ADA provide additional guidance regarding the relationship between these requirements and elements...
-
201.1 Scope
These standards apply to fixed or built-in elements of buildings, structures, site improvements, and pedestrian routes or vehicular ways located on a site....
-
Exceptions for Historic Facilities
that the specific language for the exceptions for accessible routes, entrances, and toilet facilities be included in section 202.5, instead of in the various scoping provisions for those elements...
-
11B-703.3.2 Position
Braille shall be separated 3/8 inch (9.5 mm) minimum and ½ inch (12.7 mm) maximum from any other tactile characters and 3/8 inch (9.5 mm) minimum from raised borders and decorative elements...
-
Alterations and Additions [F244.2.1]
to regulations issued under section 504 of the Rehabilitation Act, which designates specific camping units to provide mobility features, the entity is not required to provide accessible elements...
-
Alterations and Additions [F245.2.3]
to regulations issued under section 504 of the Rehabilitation Act, which designates specific picnic units to provide mobility features, the entity is not required to provide accessible elements...
-
Section 36.211 Maintenance of Accessible Features (Section-by-Section Analysis)
of this provision and proposed one change to the section to address the discrete situation in which the scoping requirements provided in the 2010 Standards reduce the number of required elements...
-
Section 35.133 Maintenance of accessible features. (Section-by-Section Analysis)
of this provision and proposed one change to the section to address the discrete situation in which the scoping requirements provided in the 2010 Standards reduce the number of required elements...
-
11B-703.3.2 Position
Braille shall be separated 3/8 inch (9.5 mm) minimum and ½ inch (12.7 mm) maximum from any other tactile characters and 3/8 inch (9.5 mm) minimum from raised borders and decorative elements...
-
11B-201.1 Scope
These requirements are to be applied to all areas of a facility unless exempted, or where scoping limits the number of multiple elements required to be accessible....
-
11B-703.3.2 Position
Braille shall be separated 3/8 inch (9.5 mm) minimum and ½ inch (12.7 mm) maximum from any other tactile characters and 3/8 inch (9.5 mm) minimum from raised borders and decorative elements...
-
Re: When is a Curb Ramp a Ramp?
say 6'' The lowest slope for a ramp would be 5.1% or just under 1:20 So if the walkway was shorter than 10' I think it could be called a curb ramp and would only require curb ramp elements...
-
ACCESSIBILITY
[DSA-AC & HCD 1-AC] Accessibility is the combination of various elements in a building, facility, site, or area, or portion thereof which allows access, circulation and the full use...
-
WHAT HAS CHANGED THE MOST?
Service animals Mobility devices Ticketing Physical Access and Barrier Removal 2010 Standards Safe Harbor Reduction of Elements...
-
§ 1194.21(c)
(c) A well-defined on-screen indication of the current focus shall be provided that moves among interactive interface elements as the input focus changes. ...
-
§ 36.304(d)(3) Reduced scoping for public accommodations
barrier removal requirements of this section, existing facilities shall comply with the applicable requirements for alterations in § 36.402 and §§ 36.404 through 36.406 of this part for the element...
-
809.2.1 Location
At least one accessible route shall connect all spaces and elements which are a part of the residential dwelling unit....
-
ALTERATION
As applied to a building or structure, means a change or rearrangement in the structural parts or elements, or in the means of egress or in moving from one location or position to another...
-
68.10(14) Facility
(14) Facility--All or any portion of buildings, structures, site improvements, elements, and pedestrian routes or vehicular ways located on a site e.g. complexes, equipment, roads, walks...
-
11B-202.3 Alterations
Where existing elements or spaces are altered, each altered element or space shall comply with the applicable requirements of Division 2, including Section 11B-202.4....
-
Reach Ranges
The 2010 Standards also add exceptions, as discussed above, to the scoping requirement for operable parts for certain elements that, among other things, will exempt them from the reach range...
- Doorbell Factory Medium Rectangle Stainless Steel Doorbell