Inside dimensions of elevator cars and clear width of elevator doors shall comply with Table 407.4.1....
Search Results "Compartment Width"
Filters
Commonly Searched Documents
-
407.4.1 Car Dimensions
-
Signal Clearance Intervals
Table 21 shows the number of seconds required for the 85th percentile user for various vehicular types to clear roadways of a given width....
-
Boolee Multi-Station Voting Booth
Twin With ADA Compliant Station Height: 60" Depth: 24" Width: 59" Tables: 18x25.5" 18x29" Table Heights: 39.5 - 32.5" Folded Width: 7.0" Weight: 22 lbs...
-
Rockwood Manufacturing Company K1038 .038" Thick - Metal Kick Plate
Material: .038" Aluminum, Stainless Steel Fastener: #6 x 5/8 OH SMS Ordering: Specify height x width x finish code. Add any options. Weight: 8" x 34" = 3.2 lbs....
-
Scope: ADA Standard Section 201.1
Section 201 discusses the scope of the ADA Standards.
-
1. Desk size
To provide adequate knee and leg clearance, desks and writing tables need to have at least 30 inches of knee width, 29 inches of knee height, and 19 inches of leg depth....
-
502 Parking Spaces
Substantive changes pertain to the: width of spaces, including van spaces, and access aisles (502.1 and 502.2) location of access aisles for angled van spaces (502.3.4)...
-
Public Way
parcel of land open to the outside air leading to a public street, which has been deeded, dedicated or otherwise permanently appropriated to the public for public use and which has a clear width...
-
11B-607.5 Controls
Controls shall be between the bathtub rim and grab bar, and between the open side of the bathtub and the centerline of the width of the bathtub....
-
4.3.4 Passing Space
If an accessible route has less than 60 in (1525 mm) clear width, then passing spaces at least 60 in by 60 in (1525 mm by 1525 mm) shall be located at reasonable intervals not to exceed...
-
4.3.4 PASSING SPACE
If an accessible route has less than 60 in (1525 mm) clear width, then passing spaces at least 60 in by 60 in (1525 mm by 1525 mm) shall be located at reasonable intervals not to exceed...
-
11B-705.2 Detectable directional texture
The width of the directional texture shall be equal to the width of the transit vehicle’s door opening. The depth of the texture shall not be less than 36 inches (914 mm)....
-
810.2.2 Dimensions
Bus stop boarding and alighting areas shall provide a clear length of 96 inches (2440 mm) minimum, measured perpendicular to the curb or vehicle roadway edge, and a clear width of 60 inches...
-
402.2 Components
., Florida requirements, except s.553.5041(5)(a) width of accessible route to parking and s.553.041(c)1 parking space and access aisle width, may be waived down to the requirements of the...
-
Protruding Objects on Beach Access Routes
Outdoor accessibility guidelines define protruding objects as constructed features such as signs that extend into the clear width area of a beach access route or resting interval and are...
-
Beach Access Routes
The proposed rule would have required the clear width of beach access routes to be 36 inches minimum....
-
2.2.4 Maneuverability
Widths of the restricted space were set at a minimum of 750 mm (30 in.) for the 90-degree turn, 750 mm (30 in.) passage width for the U-turn with a barrier, and 1300 mm (51 in.) for the...
-
11B-705.2 Detectable directional texture
The width of the directional texture shall be equal to the width of the transit vehicle’s door opening. The depth of the texture shall not be less than 36 inches (914 mm)....
-
American Safety Tread Co., Inc. Type G4702 Stairway Nosing Replacement
Width: 5" Lip: 1-3/8" at 90° angle Thickness: 1/4" Anchor Options: Drilled for screws. Standard Width: 5"...
-
Advice for Passengers with Service Animals
If you have a very large service animal or multiple animals that might need to be transported in the cargo compartment, contact the airline well in advance of your travel date....
-
810.9 Escalators
Where provided, escalators shall comply with the sections 6.1.3.5.6 and 6.1.3.6.5 of ASME A17.1 (incorporated by reference, see "Referenced Standards" in Chapter 1) and shall have a clear width...
-
Kickplates
If provided, it is recommended that they cover almost the full door width up to a height of 16 inches from the bottom edge....
-
§ 38.125(c)(2) Ramp surface
The ramp or bridge plate surface shall be continuous and slip resistant, shall not have protrusions from the surface greater than 1/4 inch high, shall have a clear width of 30 inches and...
-
M301.4.2 Clearance Around Base (Section-by-Section Analysis)
The width of the base permitted within this clearance would be 26 inches maximum at the edge of the examination surface and was permitted to increase at a rate of 1 inch in width for every...
