Section 206.7.7 covers the most current ADA Standards for platform lifts used to connect accessible routes to load and unload areas serving amusement rides.
Search Results "Clear Floor Area"
Filters
Commonly Searched Documents
-
Amusement Rides: ADA Standard Section 206.7.7
-
11B-206.7.7 Amusement rides
Platform lifts shall be permitted to provide accessible routes to load and unload areas serving amusement rides....
-
Are doors or gates to employee work areas required to comply?
Areas used only by employees as work areas must provide access for approach, entry, and exit, including means of egress....
-
F231.3.2 Court-Floor Holding Cells
Where separate court-floor holding cells are provided for adult male, juvenile male, adult female, or juvenile female, each courtroom shall be served by one cell of each type complying with...
-
231.3.2 Court-Floor Holding Cells
Where separate court-floor holding cells are provided for adult male, juvenile male, adult female, or juvenile female, each courtroom shall be served by one cell of each type complying with...
-
232.5 Visiting Areas
232.5 Visiting Areas. Visiting areas shall comply with 232.5....
-
Wilderness Access Decision Tool
Federal managers of wilderness areas can use this matrix to make appropriate, objective, and consistent decisions that meet the legal requirement to provide equal opportunity for all individuals...
-
Turning Space: ADA Standard Section 808.2
Where provided, areas that are raised or depressed and accessed by ramps or platform lifts with entry ramps shall provide unobstructed turning space complying with 304....
-
R407.9.1 Extended Ramp Surface
R407.9.1 Extended Ramp Surface. The surface of the ramp run or landing shall extend 305 mm (1.0 ft) minimum beyond the inside face of a handrail complying with R409. Advisory...
-
Turning Space [§304]
housing cells saunas and steam rooms raised courtroom stations served by ramps or lifts with entry ramps certain recreation spaces (amusement ride load/ unload areas...
-
11B-808.2 Turning space
Where provided, areas that are raised or depressed and accessed by ramps or platform lifts with entry ramps shall provide unobstructed turning space complying with Section 11B-304....
-
11B-407.4.7.1.5 Button spacing
A minimum clear space of 3/8 inch (9.5 mm) or other suitable means of separation shall be provided between rows of control buttons....
-
11B-407.4.7.1.5 Button spacing
A minimum clear space of 3/8 inch (9.5 mm) or other suitable means of separation shall be provided between rows of control buttons....
-
11B-407.4.7.1.5 Button spacing
A minimum clear space of 3/8 inch (9.5 mm) or other suitable means of separation shall be provided between rows of control buttons....
-
Figure 302.3 Elongated Openings in Floor or Ground Surfaces – Drawing from the U.S. Access Board
-
F244.5.2.1 Routes to Common Use and Public Use Areas
At least one outdoor recreation access route shall connect each camping unit with mobility features with common use and public use areas serving the unit....
-
3. Measuring Door Openings
Measuring Door Openings Special care is needed when measuring the clear opening of a doorway. To measure the clear opening of a standard hinged door, open the door to 90 degrees....
-
30.1 Q. Would it be acceptable to use removable base cabinets beneath a wall-hung lavatory where a parallel approach is not possible?
For example, the tile or other floor finish must extend under the removable base cabinet....
-
215.3 Employee Work Areas
215.3 Employee Work Areas....
-
Required Systems: ADA Standard Section 219.2
Section 219.2 covers scoping requirements in the current ADA Standards for required assistive listening systems.
-
Detention and Correctional Facilities: ADA Standard Section 203.7
Section 203.7 covers scoping requirements of general exceptions for detention and correctional facilities in the most current ADA Standards.
-
11B-206.4.1 Entrances
All entrances shall comply with Section 11B-404. [2010 ADA Standards] 206.4.1 Public Entrances. In addition to entrances required by 206.4.2 through 206.4.9, at least 60 percent...
