EXCEPTION: Where the clear width at the turn is 60 inches (1525 mm) minimum compliance with 403.5.2 shall not be required. ...
Search Results "Compliance Review"
-
403.5.2 Clear Width at Turn
-
2. Educational Uses
systems on a school site that will be used by teachers, students, staff or the general public for teaching, educational, demonstration or informational purposes shall be made accessible in compliance...
-
4.1.6(1)(d)
If stair modifications to correct unsafe conditions are required by other codes, the modifications shall be done in compliance with these guidelines unless technically infeasible....
-
1015.1 General
In alterations, when an entity determines that a condition in 1019 does not permit full compliance with a specific provision in 1015, the viewing area is permitted to comply with the provision...
-
4.5.1 General
In alterations, where a condition for exception in section 1.1 prohibits full compliance with a specific requirement for clear floor or ground space surface, slope, size, or location, the...
-
4.2 Immediately Preceding Edition
Compliance with any version of the immediately preceding code edition qualifies an element for this exception....
-
Are fire extinguishers required to comply with the ADA Standards?
The ADA Standards apply to fixed elements, such as a fire extinguisher cabinet, and require compliance with applicable requirements, including those for operable parts and storage....
-
What constitutes a “passenger loading zone”?
At other locations, compliance is not required even if passenger loading may occasionally occur, but is not specifically intended or reflected in the design....
-
Section 36.101 Purpose (Section-By-Section Analysis and Response to Comments)
prohibits discrimination on the basis of disability by public accommodations, requires places of public accommodation and commercial facilities to be designed, constructed, and altered in compliance...
-
The ASL APP by Ink & Salt LLC
Universal Gestures - Review what you already know (included, FREE!) Handshape Exercises - Warm up your hands, and get used to the different handshape positions....
-
KMA - Associate, Multi-Family Housing
The Associate will independently perform plan reviews of design documents, perform construction site audits, generate written reports, and communicate with design and construction teams...
-
Sargent 6500 Line Lever Hardware with Lockset
Cylinder: Brass, 6 pin, LA keyway standard Finishes : 3, 4, 10, 10B, 26, 26D (No Split Finish) Door Prep: ANSI A115.2 (161) Modified Minimum Stile: 4-1/2" (114mm) Certification Compliance...
-
Visually IMpaired Accessible Keypad Door Lock
attached photo of (E) touchpad Did some research online and found a Yale key pad lock that claims to have a "Push button keypad option available for more tactile requirements, such as ADA compliance...
-
A. SCOPE OF THE INVESTIGATION
Specifically, the scope of the US Attorney's investigation included Lewisboro's compliance with the following title II requirements: to conduct a self-evaluation of its services...
-
I. BACKGROUND
The FTA reviews grant applications for, among other things, compliance with the Americans with Disabilities Act (“ADA”)....
-
1009.2.1 Pool Lift Location
Where the entire pool depth is greater than 48 inches (1220 mm), compliance with 1009.2.1 shall not be required. 2....
-
Sec.36.304(d)(2)
(2) If, as a result of compliance with the alterations requirements specified in paragraph (d)(1) of this section, the measures required to remove a barrier would not be readily achievable...
-
1. Adoption of the 2010 ADA Standards for Accessible Design
To minimize compliance burdens on entities subject to more than one legal standard, these design standards have been harmonized with the Federal standards implementing the Architectural...
-
1. Adoption of the 2010 ADA Standards for Accessible Design
To minimize compliance burdens on entities subject to more than one legal standard, these design standards have been harmonized with the Federal standards implementing the Architectural...
-
403.5.2 Clear Width at Turn
EXCEPTION: Where the clear width at the turn is 60 inches (1525 mm) minimum compliance with 403.5.2 shall not be required. Figure 403.5.2 Clear Width at Turn...
-
Exceptions [1014.1, Exceptions 1 and 2]
When a condition for exception does not permit full compliance with a specific provision in the technical requirements for camp shelters, the camp shelter must comply with the specific provision...
-
412.1 General (Section-by-Section Analysis)
Would compliance with section 412 be readily achievable for manufacturers of mobile telecommunications equipment?...
-
106.5.68 Technically Infeasible
essential part of the structural frame; or because other existing physical or site constraints prohibit modification or addition of elements, spaces, or features that are in full and strict compliance...
-
4.1.7(1)(a) General Rule
applicable technical specifications of 4.2 through 4.35 and the applicable special application sections 5 through 10 unless it is determined in accordance with the procedures in 4.1.7(2) that compliance...
