Knee clearance shall extend 25 inches (635 mm) maximum under an element at 9 inches (230 mm) above the finish floor or ground....
Search Results "Plumbing Element"
-
306.3.2 Maximum Depth
-
4.30.7(1)
(1) Facilities and elements required to be identified as accessible by 4.1 shall use the international symbol of accessibility....
-
306.3.2 Maximum Depth
Knee clearance shall extend 25 inches (635 mm) maximum under an element at 9 inches (230 mm) above the finish floor or ground....
-
F244.5.1 Routes within Camping Units with Mobility Features
This section requires at least one outdoor recreation access route to connect accessible elements, spaces, and facilities provided within camping units with mobility features....
-
F245.4.1 Routes within Picnic Units with Mobility Features
This section requires at least one outdoor recreation access route to connect accessible elements, spaces, and facilities provided within picnic units with mobility features....
-
Example: Retail Facility
This example of a retail facility shows how scoping requirements for certain elements and spaces (sales counters and fitting rooms) apply and indicates employee work areas....
-
11B-306.3.2 Maximum depth
Knee clearance shall extend 25 inches (635 mm) maximum under an element at 9 inches (229 mm) above the finish floor or ground....
-
11B-306.3.2 Maximum depth
Knee clearance shall extend 25 inches (635 mm) maximum under an element at 9 inches (229 mm) above the finish floor or ground....
-
306.3.2 Maximum Depth
Knee clearance shall extend 25 inches (635 mm) maximum under an element at 9 inches (230 mm) above the finish floor or ground....
-
Public Use
Interior or exterior rooms, spaces, or elements that are made available to the public. Public use may be provided at a building or facility that is privately or publicly owned....
-
202.3.2 Extent of Application
An alteration of an existing element, space, or area of a building or facility shall not impose a requirement for accessibility greater than required for new construction....
-
11B-104.1.1 Construction and manufacturing tolerances
Where an element is to be installed at the minimum or maximum permitted dimension, such as "15 inches minimum" or "5 pounds maximum", it would not be good practice to specify "5 pounds (...
-
11B-104.1.1 Construction and manufacturing tolerances
Where an element is to be installed at the minimum or maximum permitted dimension, such as "15 inches minimum" or "5 pounds maximum", it would not be good practice to specify "5 pounds (...
-
Alterations to Qualified Historic Buildings and Facilities: ADA Standard Section 202.5
Section 202.5 covers the most current ADA Standards for alterations to qualified historic buildings and facilities.
-
11B-707.4 Privacy
ETA Editor's Note The Department of Justice considers the communication-related elements of ATMs to be auxiliary aids and services, rather than structural elements, to which the Safe...
-
Section 4.1.6, Alterations (Preamble, Section-by-Section Analysis)
First, if any existing element or space is altered, the altered element or space must meet new construction requirements (section 4.1.6(1)(b))....
-
1. Accessible route(s)
Accessible element or space ANSI A117.1 section APPLICATION 1....
-
11B-707.4 Privacy
ETA Editor's Note The Department of Justice considers the communication-related elements of ATMs to be auxiliary aids and services, rather than structural elements, to which the Safe...
-
11B-707.4 Privacy
. ◼ ETA Editor's Note The Department of Justice considers the communication-related elements of ATMs to be auxiliary aids and services, rather than structural elements, to which the...
-
11B-101.1 General
This chapter contains scoping and technical requirements for accessibility to sites, facilities, buildings, and elements by individuals with disabilities....
-
20. DESIGN AND CONSTRUCTION STANDARDS
The ADA consultant shall notify HWI in writing of any elements in the plans and designs that the ADA consultant deems non-compliant with the ADA Standards....
-
11B-101.1 General
This chapter contains scoping and technical requirements for accessibility to sites, facilities, buildings, and elements by individuals with disabilities....
-
11B-101.1 General
This chapter contains scoping and technical requirements for accessibility to sites, facilities, buildings, and elements by individuals with disabilities....
-
Using the Tape Measure
A tape measure is used to measure the length, width, height, and depth of various elements including parking spaces and access aisles, routes, thresholds, doorways, and protruding objects...