Top loading machines shall have the door to the laundry compartment located 36 inches (914 mm) maximum above the finish floor....
Search Results "Grab Bar Location"
Filters
Commonly Searched Documents
-
11B-611.4 Height
-
[2010 ADAS] 105.2.2 ASME
The building location, the elevator car number, and the need for assistance must be provided to authorized personnel answering the emergency call....
-
[2010 ADAS] 105.2.2 ASME
The building location, the elevator car number, and the need for assistance must be provided to authorized personnel answering the emergency call....
-
902.1 General
Dining surfaces include, but are not limited to, bars, tables, lunch counters, and booths....
-
902.1 General
Dining surfaces include, but are not limited to, bars, tables, lunch counters, and booths....
-
ASTM: ADA Standard Section 105.2.3
Section 105.2.3 of the ADA Standards cover references to the American Society for Testing and Materials (ASTM) standards.
-
11B-810.6.1 Entrances
Where signs identify a station or its entrance, at least one sign at each entrance shall comply with Section 11B-703.2 and shall be placed in uniform locations to the maximum extent practicable...
-
General: ADA Standard Section 220.1
Section 220.1 of the ADA Standards covers information in the current ADA Standards on scoping requirements for automatic teller and fare machines.
-
Table of Contents
Drinking Fountains 603 Toilet and Bathing Rooms 604 Water Closets and Toilet Compartments 605 Urinals 606 Lavatories and Sinks 607 Bathtubs 608 Shower Compartments 609 Grab...
-
11B-407.2.1.1 Height
Call buttons and keypads shall be located within one of the reach ranges specified in Section 11B-308, measured to the centerline of the highest operable part. Exception: Reserved....
-
11B-606.1 General
If soap and towel dispensers are provided, they must be located within the reach ranges specified in Section 11B-308, except for those in toilet and bathing rooms which must comply with...
-
GENERAL CONSIDERATIONS FOR TRAFFIC SIGNAL CONTROLLED ROUNDABOUT PEDESTRIAN CROSSINGS
traffic) side of the crosswalk threshold, and locates additional signal faces at the stop bars to emphasize stop bar location....
-
11B-904.2 Approach
All portions of counters required to comply with Section 11B-904 shall be located adjacent to a walking surface complying with Section 11B-403. Advisory 11B-904.2 Approach....
-
indoo.rs® Indoor Navigation Solution App
Location-Sharing amongst users helps to get together. Provide relevant information based on location as users walk around....
-
902.1 General
Dining surfaces include, but are not limited to, bars, tables, lunch counters, and booths....
-
Single-User Toilet Rooms: No Side Transfer Space
Lavatory placement is limited by the rear gab bar, which should not overlap counter surfaces....
-
11B-216.11 Check-out aisles
Where check-out aisles are identified by numbers, letters, or functions, signs identifying check-out aisles complying with Section 11B-904.3 shall be located in the same location as the...
-
Reasonable Accommodation Management Software
Whether your environment is a single location call center, a regional school district, or a 6,000 location food service enterprise, your RAMS solution can be up and running by the end of...
-
11B-233.3.1.2.4 Multi-story residential dwelling units in buildings with one or more elevators
At least one powder room or bathroom and kitchen shall be located on the primary entry level....
-
Section 36.406(e) Housing at a Place of Education
Others may contain cluster, suite, or group arrangements where several rooms are located inside a defined unit with bathing, kitchen, and similar common facilities....
-
Clear Floor Space: ADA Standard Section 808.3
EXCEPTION: In alterations, wheelchair spaces are not required to be located within the defined area of raised jury boxes or witness stands and shall be permitted to be located outside these...
-
Doors: ADA Standard Section 604.8.1.2
Section 604.8.1.2 covers the current ADA Standards for wheelchair accessible compartment doors.
-
Horizontal Dispersion: ADA Standard Section 221.2.3.1
Section 221.2.3.1 covers scoping requirements in the current ADA Standards for horizontal Dispersion in assembly areas.
-
Map-kiosk hybrid
The map includes a bar code that allows the pedestal to "recognize" the visitor; once identified, the pedestal displays a large, bright You are Here marker, which shows through the translucent...
