Construction: 1-1/4" trim with mitered and welded corners, square return with countersunk mounting holes both sides. Door: For 1" - 3" thick....
Search Results "Flared Side"
Commonly Searched Documents
- Activar Construction Products Group Standard Vision Lite VLFIG
- Pilot Rock ASW-20 Series Grill
- Magnuson Group 1000 Series Magazine Racks
- Bobrick Shower Curtain B-204.3
- Bobrick Shower Curtain B-204.2
-
Section H: Lifts
If a side door/gate is provided, is the clear opening width at least 42"? (§410.6) ...
-
406.7 Islands
Raised islands in crossings shall be cut through level with the street or have curb ramps at both sides....
-
1009.4.5 Grab Bars
Where one grab bar is provided, clearance shall be 24 inches (610 mm) minimum on both sides of the grab bar....
-
Entry Points and Seats
Consider design features like open sides, back supports, and hand supports (right) to help facilitate easy transfer and access....
-
1003.2.12.2 Opening limitations
Exception: The triangular opening formed by the riser, tread and bottom rail at the open side of a stairway shall be of a maximum size such that a sphere of 6 inches (152mm) in diameter...
-
Clear Deck Space
This space must be located on the side of the seat opposite the water. The slope of the clear deck space must not be greater than 1:48 (2%)....
-
704.11.1 Parapet construction
Parapets shall have the same fire-resistance rating as that required for the supporting wall, and on any side adjacent to a roof surface, shall have noncombustible faces for the uppermost...
-
General [9.1.1]
Where room numbers are provided, they must be raised and Brailled and located on the wall at the latch-sides of doors for safety and uniformity....
-
Van-Accessible Parking Spaces
(illustration showing a van with a side-mounted wheelchair lift lowered onto a marked access aisle at a van-accessible parking space....
-
11B-308.4 Suggested reach ranges for children
These dimensions apply to either forward or side reaches. ...
-
1132A.9 Smooth surface
Swinging door or gate surfaces within 10 inches (254 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
-
1132A.9 Smooth surface
Swinging door or gate surfaces within 10 inches (254 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
- Kohler Elevance Rising Wall Alcove Bath
- Inclusion Solutions Freestanding Totem Pocket Display
- Lynx Grills Inc. 30” Grill ProSear Burner & 1 Stainless Steel Burner (L500ADA)
-
Avoid the extremes of surface reflectivity and contrast (slides 11 and 13)
So maybe in that black stairwell you missed, if it had been a contrasting color on the side, you would see that depth on each step....
-
Providing Comforts and Conveniences—Constructed Features
Clear floor or ground space is required around the usable sides of each constructed feature, but the size of the clear space varies with the feature....
-
221 Assembly Areas
In row seating, two wheelchair spaces shall be permitted to be located side-by- side....