(D) Special rule for bi-level dining cars for individuals who use wheelchairs Bi-level dining cars shall not be required to
Search Results "Area of Rescue Assistance"
Filters
Commonly Searched Documents
-
12162(a)(2)(D) Special rule for bi-level dining cars for individuals who use wheelchairs
-
1008.2.5.3 Handrails
1008.2.5.3 Handrails. Where required on ramps serving play components, the handrails shall comply with 505 except as modified by 1008.2.5.3. EXCEPTIONS: 1. Handrails shall not be...
-
4.1.3 ACCESSIBLE HOUSING
Accessible housing shall comply with the requirements of 4.1 and 4.34 except as noted below:
-
1015.5 Surface
The surface of clear ground spaces and turning spaces shall be firm and stable.
-
11B-1008.2.6.1 Accessibility
Ground surfaces shall comply with ASTM F 1951. Ground surfaces shall be inspected and maintained regularly and frequently to ensure continued compliance with ASTM F 1951.
-
Identification of available accessible seating. (Section-by-Section Analysis)
Identification of available accessible seating. In the NPRM, the Department proposed § 35.138(c), which, as modified and renumbered as paragraph (b)(3) in the final rule, requires a...
-
11B-1002.5 Amusement ride seats designed for transfer
Amusement ride seats designed for transfer shall comply with Section 11B-1002.5 when positioned for loading and unloading. [2010 ADAS] Advisory 1002.5 Amusement Ride Seats...
-
17. Exposing Vehicle to Hazards
If the passenger requests that a vehicle follow a path to a pick up or drop off point that would expose the vehicle and its occupants to hazards, such as running off the road,...
-
§ 38.29(e)
(e) For vehicles in excess of 22 feet in length with front-door lifts or ramps, vertical stanchions immediately behind the driver shall either terminate at the lower edge of the...
-
11B-247.1.2.5 Blended transitions
11B-247.1.2.5 Blended transitions. Blended transitions shall have detectable warnings complying with Sections 11B-705.1.1 and 11B-705.1.2.5.
-
11B-1002.5 Amusement ride seats designed for transfer
Amusement ride seats designed for transfer shall comply with Section 11B-1002.5 when positioned for loading and unloading. Advisory 11B-1002.5 Amusement ride seats designed...
-
11B-705.1.2.5 Blended transitions
11B-705.1.2.5 Blended transitions. Detectable warnings at blended transitions shall be 36 inches (914 mm) in width.
-
11B-1008.2.6.1 Accessibility
Ground surfaces shall comply with ASTM F 1951. Ground surfaces shall be inspected and maintained regularly and frequently to ensure continued compliance with ASTM F 1951.
-
Center on Knowledge Translation for Technology Transfer (KT4TT)
The Center on Knowledge Translation for Technology Transfer (KT4TT) is a program of the Center of Assistive Technology at the University at Buffalo, sponsored by the National Institute on...
-
CATEA - Georgia Tech - Atlanta, GA
CATEA (Center for Assistive Technology and Environmental Access) is a multidisciplinary research center devoted to enhancing the lives of people with all levels of ability and functional...
-
C. ACCESSIBILITY FOR DEAF AND HARD OF HEARING PATRONS
Within six months of the Effective Date of this Agreement, the Cavs shall have 233 fully functional receivers for assisted listening systems available for patrons with a hearing disability...
-
221.2.3.1 Horizontal Dispersion
Horizontal dispersion shall not be required in assembly areas with 300 or fewer seats if the companion seats required by 221.3 and wheelchair spaces are located within the 2nd or 3rd quartile...
-
221.2.3.1 Horizontal Dispersion
Horizontal dispersion shall not be required in assembly areas with 300 or fewer seats if the companion seats required by 221.3 and wheelchair spaces are located within the 2nd or 3rd quartile...
-
Section 36.406(f) Assembly Areas (Section-by-Section Analysis)
The sale of any seats in the covered area requires removal of the platform, thereby eliminating some of the required wheelchair seating locations. ...
-
§382.125 What procedures do carriers follow when wheelchairs, other mobility aids, and other assistive devices must be stowed in the cargo compartment?
[See subsections ...]
-
F221.2.3.1 Horizontal Dispersion
Horizontal dispersion shall not be required in assembly areas with 300 or fewer seats if the companion seats required by F221.3 and wheelchair spaces are located within the 2nd or 3rd quartile...
-
11B-407.4.1 Car dimensions
Exception: In existing buildings, where existing shaft configuration prohibits strict compliance with Section 11B-407.4.1, existing elevator car configurations that provide a clear floor area...
-
11B-407.4.1 Car dimensions
Exception: In existing buildings, where existing shaft configuration prohibits strict compliance with Section 11B-407.4.1, existing elevator car configurations that provide a clear floor area...
-
§27.71(c)
(c) The airport shall ensure that there is an accessible path between the gate and the area from which aircraft are boarded....
