Car doors shall be positioned at the narrow ends of cars and shall provide 32 inches (815 mm) minimum clear width. EXCEPTIONS: 1....
Search Results "Head End Wall"
Commonly Searched Documents
-
408.4.1 Car Dimensions and Doors
-
E.6.i. - Will there be a web site providing information on how manufacturers have addressed the Access Board’s technical provisions?
At some point, it is possible that manufacturers may voluntarily label products based on industry developed measures to enable end users to more easily identify how a product meets the applicable...
-
1004.1 Clear Floor Space
To optimize space use, designers should carefully consider layout options such as connecting ends of the row and center aisle spaces....
-
2.1.2. Compliance Year
With an 18 month compliance period, the Final RA assumes that all auditoriums will be equipped to provide closed movie captioning and audio description by the end of 2017, the “compliance...
-
§100.203(a)
However, where it is necessary in order to ensure with reasonable certainty that funds will be available to pay for the restorations at the end of the tenancy, the landlord may negotiate...
-
Turning Space [§304]
Clear Width at 180 Degree Turn Around a Narrow Obstruction Recommendation: Turning space is recommended in small spaces with entrapment risks as well as at dead-end aisles...
-
11B-1004.1 Clear floor space
To optimize space use, designers should carefully consider layout options such as connecting ends of the row and center aisle spaces....
-
11B-1004.1 Clear floor space
To optimize space use, designers should carefully consider layout options such as connecting ends of the row and center aisle spaces....
-
B. TTYs & Telephone Relay Services
When typing on a TTY, each letter is transmitted by an electronic code called Baudot, which is sent from the TTY on the sending end of the call through the telephone line in the form of...
-
Transit Shelters (R308.2) (Section-by-Section Analysis)
Where seating is provided within transit shelters, the clear space must be located either at the end of a seat, or not overlap the area within 460 millimeters (1.5 feet) from the front edge...
-
382.7 To whom do the provisions of this Part apply?
Only flights of foreign carriers that begin or end at a U.S. airport, and aircraft used in these operations, are covered....
-
1134A.8 Lavatories, vanities, mirrors and towel fixtures
Vanities and lavatories shall be installed with the centerline of the fixture a minimum of 18 inches (457 mm) horizontally from an adjoining wall or fixture to allow for forward approach...
-
11B-609.4 Position of grab bars
The height of the lower grab bar on the back wall of a bathtub shall comply with Section 11B-607.4.1.1 or 11B-607.4.2.1....
-
804.3.1 Clear Floor or Ground Space
conditions are met: (a) the cabinetry can be removed without removal or replacement of the kitchen work surface; (b) the finish floor extends under the cabinetry; and (c) the walls...
-
608.2.1 Transfer Type Shower Compartments
Clearance of 36 inches (915 mm) wide minimum by 48 inches (1220 mm) long minimum measured from the control wall shall be provided....
-
Parallel Grab Bars
Two parallel grab bars are required on the back wall of bathtubs with seats (607.4.1.1) and without seats (607.4.2.1)....
-
404.2.4.3 Recessed Doors and Gates
A door can be recessed due to wall thickness or because of the placement of casework and other fixed elements adjacent to the doorway....
-
404.2.4.3 Recessed Doors and Gates
A door can be recessed due to wall thickness or because of the placement of casework and other fixed elements adjacent to the doorway....
-
609.4 Position of Grab Bars
The height of the lower grab bar on the back wall of a bathtub shall comply with 607.4.1.1 or 607.4.2.1....
-
Adaptability
It is not intended to include moving walls, relocating plumbing, replacing fixtures, widening door frames, or other work more appropriately addressed in design and construction....
-
Pit Toilet
A pit toilet riser may or may not be surrounded by walls and may or may not have a roof. ...
-
Pit Toilet
A pit toilet riser may or may not be surrounded by walls and may or may not have a roof....