UL and cUL listed for self-closing doors without hold-open. Tested and certified under ANSI Standard A156.4, grade one. ...
Search Results "Closet Door"
-
Allegion LCN 1260 Series Surface Mounted Door Control
-
Mockett DH2A/BB-SSS Curved Door Handle Back to back Small
DESCRIPTION Small bow door handles have a hefty feel and grip, defined by their solid construction and fine craftsmanship. Stately arcing bow design suitable for any door type....
-
Allegion LCN 4000 Series Surface Mounted Door Control
Handed for right or left swinging doors, except 4000T, 4030, 4030T, 4040, and 4040T Closers to meet ADA reduced opening force requirements except 4000T Adjustable hydraulic...
-
Toilet Rooms-Special Exhibit Space
The force required to push or pull open the restrooms' vestibule doors is 10 lbf, which exceeds the maximum allowable door opening force of 5 lbf. See Standards § 4.13.11(2)(b). v....
-
Hager Companies Modified Half Round Wrought Door Pull 1
Modified Half Round Wrought Door Pull Materials: - Aluminum, brass, bronze, stainless steel Accessible: - 2-1/2" (64 mm) Clearance available on special order....
-
§ 38.113(a)(1)
(1) At least one doorway, on each side of the car from which passengers board, of each car required to be accessible by §38.111(a) and where the spaces required by §38.111(d) of this...
-
§ 38.113(a)(2)
(2) Doorways at ends of cars connecting two adjacent cars, to the maximum extent practicable in accordance with regulations issued under the Federal Railroad Safety Act of 1970 (49...
-
§ 38.53(a)(1)
(1) Passenger doorways on vehicle sides shall have clear openings at least 32 inches wide when open.
-
§ 38.153(c)
(c)
-
§ 38.53(b) Signage
(b) Signage. The International Symbol of Accessibility shall be displayed on the exterior of accessible vehicles operating on an accessible rapid rail system unless all vehicles are...
-
§ 38.113(a) Clear width
(a) Clear width.
-
Mockett DH3/BB Square Door Handle Back to back
DESCRIPTION Traditional square pull design gives a bold striking look on any door type....
-
(1)(a)
maximum of 19 inches (485 mm), if the lowest portion of the fixture is a minimum of 29 inches (740 mm) above the floor, provided such fixtures do not interfere with access to the water closet...
-
4(6)
(6) At the primary entry door to dwelling units with direct exterior access, outside landing surfaces constructed of impervious materials such as concrete, brick or flagstone, are no more...
-
Mockett DH2B/BB-SSS Curved Door Handle Back to back Medium
DESCRIPTION Medium bow door handles have a hefty feel and grip, defined by their solid construction and fine craftsmanship. Stately arcing bow design suitable for any door type....
-
Eliason Corporation FP-ALU5R Heavy Duty Aluminum Mid-Panel Door
FP-ALU5R Heavy Duty Aluminum Mid-Panel Door The Eliason Fiber-Flex FP-ALU5R is a heavier duty door featuring 5” wide stiles and is designed for high usage applications....
-
Allegion Falcon SC70 Series Surface Mounted Door Control
Falcon SC70 Series heavy duty closers are built for busy commercial applications that demand reliable door control and easy maintenance. ...
-
LaCantina Multi-slide Aluminum Sliding Door System Pocket Door Model
Requires the Premium User plan or above. (Login or upgrade your account!) -
Stanley QDC 200 Series Grade 1 Heavy Duty Door Closers
Stanley extra heavy duty, heavy duty and standard door closers are fully adjustable (1-6) out of the box - so either closer will meet all your building requirements....
-
Stanley QDC 300 Series Grade 1 Standard Duty Door Closers
Stanley extra heavy duty, heavy duty and standard door closers are fully adjustable (1-6) out of the box - so either closer will meet all your building requirements....
-
609.4 Position of Grab Bars
be installed in a horizontal position, 33 inches (840 mm) minimum and 36 inches (915 mm) maximum above the finish floor measured to the top of the gripping surface, except that at water closets...
-
Hager Companies 5400 Series - Standard Duty Surface Door Closer
The closers are non-handed to permit installation on doors of either hand. These closers have fixed spring sizes....
-
11B-809.10.7.5 Controls
Controls shall be mounted 44 inches (1118 mm) maximum above the finish floor. The force required to activate controls shall be 5 pounds (22.2 mm) maximum.
