DESCRIPTION Traditional square pull design gives a bold striking look on any door type....
Search Results "Closet Door"
- Mockett DH3/BB Square Door Handle Back to back
-
A4.17.3 Size and Arrangement
A standard stall provides a clear space on one side of the water closet to enable persons who use wheelchairs to perform a side or diagonal transfer from the wheelchair to the water closet...
-
11B-609.4 Position of grab bars
be installed in a horizontal position, 33 inches (838 mm) minimum and 36 inches (914 mm) maximum above the finish floor measured to the top of the gripping surface, except that at water closets...
-
11B-609.4 Position of grab bars
be installed in a horizontal position, 33 inches (838 mm) minimum and 36 inches (914 mm) maximum above the finish floor measured to the top of the gripping surface, except that at water closets...
-
609.4 Position of Grab Bars
be installed in a horizontal position, 33 inches (840 mm) minimum and 36 inches (915 mm) maximum above the finish floor measured to the top of the gripping surface, except that at water closets...
- Mockett DH2B/BB-SSS Curved Door Handle Back to back Medium
- Eliason Corporation FP-ALU5R Heavy Duty Aluminum Mid-Panel Door
- Allegion Falcon SC70 Series Surface Mounted Door Control
-
LaCantina Multi-slide Aluminum Sliding Door System Pocket Door Model
Requires the Premium User plan or above. (Login or upgrade your account!)
- Stanley QDC 200 Series Grade 1 Heavy Duty Door Closers
- Stanley QDC 300 Series Grade 1 Standard Duty Door Closers
- Hager Companies 5400 Series - Standard Duty Surface Door Closer
-
Toilet Rooms-Special Exhibit Space
The force required to push or pull open the restrooms' vestibule doors is 10 lbf, which exceeds the maximum allowable door opening force of 5 lbf. See Standards § 4.13.11(2)(b). v....
-
§ 38.113(a)(1)
(1) At least one doorway, on each side of the car from which passengers board, of each car required to be accessible by §38.111(a) and where the spaces required by §38.111(d) of this...
-
§ 38.113(a)(2)
(2) Doorways at ends of cars connecting two adjacent cars, to the maximum extent practicable in accordance with regulations issued under the Federal Railroad Safety Act of 1970 (49...
-
§ 38.53(a)(1)
(1) Passenger doorways on vehicle sides shall have clear openings at least 32 inches wide when open.
-
§ 38.153(c)
(c)
-
§ 38.53(b) Signage
(b) Signage. The International Symbol of Accessibility shall be displayed on the exterior of accessible vehicles operating on an accessible rapid rail system unless all vehicles are...
-
§ 38.113(a) Clear width
(a) Clear width.
-
11B-609.4 Position of grab bars
be installed in a horizontal position, 33 inches (838 mm) minimum and 36 inches (914 mm) maximum above the finish floor measured to the top of the gripping surface, except that at water closets...
- Access Board: Door and Gate Surfaces
- Corbin Russwin Inc. DC3000 Series Cast Iron Door Closer
- Mockett DH403-BB Square Bar Door Handle Back to Back