[2010 ADA Standards] 607.4 Grab Bars. Grab bars for bathtubs shall comply with 609 and shall be provided in accordance with 607.4.1 or 607.4.2. Exceptions: 1. Reserved....
Search Results "1991 Standards"
-
11B-607.4 Grab bars
-
11B-405.5 Clear width
[2010 ADA Standards] 405.5 Clear Width. The clear width of a ramp run and, where handrails are provided, the clear width between handrails shall be 36 inches (915 mm) minimum....
-
11B-405.2 Slope
[2010 ADA Standards] EXCEPTION: In existing sites, buildings, and facilities, ramps shall be permitted to have running slopes steeper than 1:12 complying with Table 405.2 where such...
-
11B-607.4 Grab bars
[2010 ADA Standards] 607.4 Grab Bars. Grab bars for bathtubs shall comply with 609 and shall be provided in accordance with 607.4.1 or 607.4.2. Exceptions: 1. Reserved....
-
11B-405.5 Clear width
[2010 ADA Standards] 405.5 Clear Width. The clear width of a ramp run and, where handrails are provided, the clear width between handrails shall be 36 inches (915 mm) minimum....
-
11B-405.2 Slope
[2010 ADA Standards] EXCEPTION: In existing sites, buildings, and facilities, ramps shall be permitted to have running slopes steeper than 1:12 complying with Table 405.2 where such...
-
F. Swimming Pool Entrance and Deck
Swimming Pool Entrance and Deck (1) Defendants will install a self-operated pool lift complying with 2010 ADA Standards §§ 242.2 and 1009.2 at the main swimming pool....
- How to Interact with Disabled People | Victoria Hamilton | TEDxYouth@Columbia
-
Where Required: Multi-Story Buildings and Facilities [§206.2.3]
However, if a building does qualify for an exception in the Standards: all other provisions in the Standards still apply to stories and mezzanines not served by an accessible route...
-
4. My pool already existed before the effective date of the new rule. What am I required to do to provide pool access to customers with mobility disabilities?
The 2010 Standards provide the benchmark, or goal, for accessibility in existing pools. (See Question 2 for the 2010 Standards requirements for pools)....
-
201.1 Scope
This code establishes standards for accessibility to places of public accommodation and commercial facilities by individuals with disabilities....
-
B. Advisory Committee and Final Report (2006-2008)
In the years following our initial promulgation of the 508 Standards and 255 Guidelines, technology continued to evolve at a rapid pace....
-
5. Medical Diagnostic Equipment
On January 9, 2017, new accessibility standards were published in the Federal Register for medical diagnostic equipment....
-
702.3 Association for Information and Image Management (AIIM)
Copies of the referenced standard may be obtained from AIIM,1100 Wayne Ave., Ste. 1100, Silver Spring, Maryland 20910 (http://www.aiim.org/Resources/Standards/AIIM_ISO_14289-1)....
-
Accessible
The element or feature meets the minimum technical specifications under the 2010 Americans with Disabilities Act (ADA) Standards for Accessible Design and the Architectural Barriers Act...
-
§1193.51(b) Connection point for external audio processing devices
Products providing auditory output shall provide the auditory signal at a standard signal level through an industry standard connector....
-
3.3.9 Toe Clearance Depth, minimum
3.3.9 Toe Clearance Depth, minimum Toe clearance depths for the standards range from 150 mm (6 in.) in the U.S. to 230 mm (9 in.) in Canada (Figure 3‒9)....
-
15(d)
subparagraph 15(a), HWI shall ensure that each Post-1993 Owned Hotel and Post-1993 Joint Venture Hotel has the required number of accessible rooms with roll-in showers as set forth in ADA Standards...
-
Sections 35.108(d)(1)(v) and 36.105(d)(1)(v)—Comparisons to Most People in the Population, and Impairment Need Not Prevent or Significantly or Severely Restrict a Major Life Activity
See 56 FR35694, 35699 (July 26, 1991)....
-
Toilet Stalls [4.17]
Toilet Stalls [4.17] The standard stall in section 4.17 is wheelchair accessible....
-
§40.6 Records.
agency's file on each contract, grant, or loan involving the design, construction, or alteration of a residential structure shall include appropriate documentation indicating: (a) That the standards...
-
Q4.) Are conditions like door closers that require force in excess of the maximum allowed by the standards considered true tolerances or are they simply non-compliance with the maintenance requirements of 35.133 or 36.211?
A4.) In our opinion, the plain language of the term “Construction and Manufacturing Tolerances” does not include adjustable conditions that can meet the detailed requirements when...
-
M101.1 Purpose
The standards contain technical criteria for medical diagnostic equipment that is accessible to and usable by patients with disabilities....