The clear ground space shall be 36 inches (915 mm) minimum by 48 inches (1220 mm) minimum and shall be positioned for either a forward or parallel approach to the viewing location. ...
Search Results "Positioning Support"
-
1015.2 Clear Ground Space
-
Clear Deck Space
must have a clear deck space adjacent to it that is 60 by 60 inches minimum, with a slope not steeper than 1:48 so a person using a wheelchair can turn around and maneuver into transfer position...
-
Issue 18: What design guidance on accessibility through contrast and signage attributes can be provided in the short term for persons with low vision?
And from the clinical corner here – I hear a lot of positive “Hmms” – because this is the appropriate use of an aesthetic....
-
4.2.4.1 Size and Approach
The minimum clear floor or ground space for wheelchairs may be positioned for forward or parallel approach to an object (see Fig. 4(b) and (c))....
-
1015.2 Clear Ground Space
The clear ground space shall be 36 inches (915 mm) minimum by 48 inches (1220 mm) minimum and shall be positioned for either a forward or parallel approach to the viewing location....
-
Section 36.309 Examinations and Courses (Section-by-Section Analysis)
Overall, most commenters supported this addition to the regulation....
-
When I Walk Video Journal 112 - Here I Am
New York is number one for supporting those people with disabilities while Texas is dead last....
-
Pilot Rock UT Series Side Accessible Picnic Table Using Aluminum
Diagonal braces are used to support and reinforce the table structure. ...
-
T402.2 Design Load
Ramps and bridgeplates 30 inches (760 mm) or more in length shall be designed to support a load of 600 pounds (273 kg) minimum, placed at the centroid of the ramp distributed over an area...
-
A4.26.1 General
Many people brace their forearms between supports and walls to give them more leverage and stability in maintaining balance or for lifting....
-
C201.1 Scope
Manufacturers of telecommunications equipment shall also conform to the requirements in the 255 Guidelines for software, content, and support documentation and services where associated...
-
A4.26.1 GENERAL
Many people brace their forearms between supports and walls to give them more leverage and stability in maintaining balance or for lifting....
-
Cognitive Impairments
Be patient, flexible, and supportive; take time to understand the customer and make sure the customer understands you. Be prepared to follow up in writing....
-
§ 38.23(b)(1) Design load
Working parts, such as cables, pulleys, and shafts, which can be expected to wear, and upon which the lift depends for support of the load, shall have a safety factor of at least six, based...
-
§ 38.95(b)(1) Design load
Working parts, such as cables, pulleys, and shafts, which can be expected to wear, and upon which the lift depends for support of the load, shall have a safety factor of at least six, based...
-
§ 38.125(b)(1) Design load
Working parts, such as cables, pulleys, and shafts, which can be expected to wear, and upon which the lift depends for support of the load, shall have a safety factor of at least six, based...
-
§ 38.83(b)(1) Design Load
Working parts, such as cables, pulleys, and shafts, which can be expected to wear, and upon which the lift depends for support of the load, shall have a safety factor of at least six, based...
-
Sloan Optima® EHD-401 Sensor Activated Hand Dryer for Surface Mounting
ambient room temperature Vandal-resistant metal protective grill to prevent the entry of foreign objects into the blower housing Air flow comes from the base in a downward position...
-
12111(8) Qualified individual with a disability
The term qualified individual with a disability means an individual with a disability who, with or without reasonable accommodation, can perform the essential functions of the employment position...
-
17. Q: Do I have to create another job for an employee who, because of disability, can no longer perform the essential functions of her job even with reasonable accommodation?
However, the employee must be reassigned to a vacant position for which the individual is qualified if it does not involve a promotion and it would not result in an undue hardship....
-
711.4.1.2 Through-penetration firestop system
Through penetrations shall be protected by an approved through-penetration firestop system installed and tested in accordance with ASTM E 814, with a minimum positive pressure differential...
-
12. Staff
.: installing bathtub seats, lowering adjustable shower wands, placing folding seats in transfer showers in the down position, installing auxiliary fire alarm strobes into the building alarm...
-
7.3 Nondiscrimination in all Employment Practices
from layoff, and rehiring; Rates of pay or any other form of compensation, and changes in compensation; Job assignments, job classifications, organizational structures, position...
-
4.3.1 Overview of Imaging Equipment and Regulatory Environment
Generally, this equipment is permanently mounted in a fixed installation within specially designed spaces that must perform specific essential functions, including supporting heavy weight...
