Where the passing space is the intersection of two trails, the intersection must be as flat as possible so that all of the wheels of a mobility device touch the ground when turning into...
Search Results "Mobility Device"
-
1017.4.1 Size
-
Other Road and Shared Use Path Users with Disabilities
vision loss (who may not use a white cane or guide animal); (2) individuals with hearing impairments or deafness; (3) individuals with cognitive limitations; and (4) people who use other mobility...
-
1018.4 Clear Width
This section requires the clear width of beach access routes to be 60 inches minimum to enable individuals who use wheeled mobility devices to pass beach visitors traveling in the opposite...
-
II. Recommendations of Diagnostic Imaging Equipment Manufacturers on Transfer Surface Low Height
However, the Committee did agree that an additional requirement, that of adjustability up to 25 inches, was critical to ensure access, given the variety of mobility device seating heights...
- American National Standard/AAMI HE75:2009/(R)2013 Human factors engineering – Design of medical devices
-
Observations:
This sample had just three 4-wheeled scooters which limits detailed comparisons with 3-wheeled scooters For platforms designed to accommodate wheeled mobility devices, additional...
-
Transfer Surface Height (M301.2.1 and M302.2.1)
For many patients who use mobility devices, independent transfer is possible only if the height of the transfer surface is at or near the seat height of their mobility device....
-
Clear Floor Space: Minimum Clear Floor Space Required for Forward and Side Approach - Manual Wheelchair
This data depicts the amount of clear floor area required by persons using wheeled mobility devices when performing a forward or side reach to a target location (e.g., reaching to a...
-
Clear Floor Space: Minimum Clear Floor Space Required for Forward and Side Approach - Scooter
This data depicts the amount of clear floor area required by persons using wheeled mobility devices when performing a forward or side reach to a target location (e.g., reaching to a...
-
Clear Floor Space: Minimum Clear Floor Space Required for Forward and Side Approach - Power Chair
This data depicts the amount of clear floor area required by persons using wheeled mobility devices when performing a forward or side reach to a target location (e.g., reaching to a...
-
4.3.5.4 360-degree Turn
There are substantial differences between the device types....
-
Security Glazing: ADA Standard Section 904.6
Telephone handset devices, if provided, shall comply with 704.3. Advisory 904.6 Security Glazing....
-
Guest Room Doors and Doorways: ADA Standard Section 224.1.2
Section 224.1.2 covers scoping requirements in the current ADA Standards for transient lodging guest room doors and doorways.
-
NOTES
See Analysis of Seat Heights for Wheeled Mobility Devices at: http://udeworld.com/analysis-of-seat-height-for-wheeled-mobility-devices. ...
-
11B-206.5.3 Transient lodging facilities
In transient lodging facilities, entrances, doors, and doorways providing user passage into and within guest rooms that are not required to provide mobility features complying with Section...
-
11B-206.5.3 Transient lodging facilities
In transient lodging facilities, entrances, doors, and doorways providing user passage into and within guest rooms that are not required to provide mobility features complying with Section...
-
11B-224.1.2 Guest room doors and doorways
Entrances, doors and doorways providing user passage into and within guest rooms that are not required to provide mobility features complying with Section 11B-806.2 shall comply with Section...
-
4.1 Introduction
4.1 Introduction The research demonstrated that there is a need to revise the standards for wheeled mobility access to reflect the body structure and functional abilities of this population...
-
11B-224.1.2 Guest room doors and doorways
Entrances, doors, and doorways providing user passage into and within guest rooms that are not required to provide mobility features complying with Section 11B-806.2 shall comply with Section...
-
Subpart D —Requirements for Compatibility With Peripheral Devices and Specialized Customer Premises Equipment
[See subsections ...]
-
1008.3 Transfer Systems
Designers should minimize the distance between the points where a child transfers from a wheelchair or mobility device and where the elevated play components are located....
-
4. Do the carpet requirements of Section 302.2 apply to ground level accessible routes within a play area?
ASTM F 1951-99 measures the effort of work required to propel a mobility device across a surface....
-
HOW TO MEASURE TRANSFER HEIGHTS IS IMPORTANT
However, these fixed heights tables do not allow for independent transfer of patients who use wheeled mobility devices (WMD)....
-
5.2.1 Transfer Surface Size Recommendations for M301
5.2.1 Transfer Surface Size Recommendations for M301 Description: The transfer surface is the part of the diagnostic equipment onto which patients who use mobility devices or aids transfer...