to, weather or traffic conditions affecting all vehicular traffic that were not anticipated at the time a trip was scheduled) shall not be a basis for determining that such a pattern or practice...
Search Results "Maximum Extent Practicable"
-
§ 37.131(f)(3)(ii)
-
§ 37.169(a)(2)
how to contact the public entity to make requests for reasonable modifications readily available to the public through the same means it uses to inform the public about its policies and practices...
-
Undue Burden
in such an alteration or such burdens, a public entity shall take any other action that would not result in such an alteration or such burdens but would nevertheless ensure that, to the maximum...
-
Alterations to elevators. (Section-by-Section Analysis)
Under the 1991 Standards, if an existing elevator is altered, only that altered elevator must comply with the new construction requirements for accessible elevators to the maximum extent...
-
Alterations to elevators. (Section-by-Section Analysis)
Under the 1991 Standards, if an existing elevator is altered, only that altered elevator must comply with the new construction requirements for accessible elevators to the maximum extent...
-
Section 37.161 Maintenance of Accessible Features--General
The ADA requires that, to the maximum extent feasible, facilities be accessible to and usable by individuals with disabilities....
-
1017.10 Trailhead Signs
Typical and maximum running slope; and 5. Typical and maximum cross slope....
-
407.8.3.2 Obstructed Forward Reach
Where the operable part is located beyond the leading edge of the maximum protrusion within the length of the vertical reference plane, the operable part shall conform to 407.8.3.2....
-
1017.10 Trailhead Signs
Typical and maximum running slope; and 5. Typical and maximum cross slope....
-
11B-232.1 General
alterations are originally planned), provided that each substitute cell— i) Is located within the same prison site; ii) Is integrated with other cells to the maximum...
-
11B-232.1 General
alterations are originally planned), provided that each substitute cell— i) Is located within the same prison site; ii) Is integrated with other cells to the maximum...
-
Defining and Delivering Disability-Competent Care - The Individualized Plan of Care
This is the fifth webinar in Webinar Series #1, "Leading Healthcare Practices and Training: Defining and Delivering Disability-Competent Care". ...
-
12209(a)(3) Exercise of rulemaking power
are enacted by the Senate as an exercise of the rulemaking power of the Senate, with full recognition of the right of the Senate to change its rules, in the same manner, and to the same extent...
-
232.3 Special Holding Cells and Special Housing Cells
EXCEPTION: Alterations to cells shall not be required to comply except to the extent determined by the U. S. Attorney General....
-
§104.14(b)
pursuant to §104.6(b), or when a recipient is taking affirmative action pursuant to section 503 of the Act, the recipient may invite applicants for employment to indicate whether and to what extent...
-
§35.178 State immunity
In any action against a State for a violation of the requirements of this Act, remedies (including remedies both at law and in equity) are available for such a violation to the same extent...
-
C201.2 Readily Achievable (Section-by-Section Analysis)
shall ensure that the equipment or service is compatible with existing peripheral devices or specialized customer premises equipment commonly used by individuals with disabilities to the extent...
-
4.1.6(1)(h) Entrances
a planned alteration entails alterations to an entrance, and the building has an accessible entrance, the entrance being altered is not required to comply with 4.1.3(8), except to the extent...
-
§ 37.107(c)
(c) Compliance with paragraph (b) of this section is not required to the extent that it would significantly alter the historic or antiquated character of a historic or antiquated rail passenger...
-
11B-303.2 Vertical
Changes in level of ¼ inch (6.4 mm) high maximum shall be permitted to be vertical and without edge treatment. [2010 ADAS] 303.2 Vertical. ...
-
R409.7.2 Non-Circular Cross Sections
Handrail gripping surfaces with a non-circular cross section shall have a perimeter dimension of 100 mm (4 in) minimum and 160 mm (6.25 in) maximum, and a cross-section dimension of 57 mm...
-
407.8.3.1 Unobstructed Forward Reach
Where the operable part is located at the leading edge of the maximum protrusion within the length of the vertical reference plane of the ICT, the operable part shall be 48 inches (1220...
-
11B-703.7.2.6.4 Edges and vertices on geometric symbols
Edges shall be eased or rounded at 1/16 inch (1.59 mm) minimum, or chamfered at 1/8 inch (3.2 mm) maximum....
-
Q1.) When a ramp has a maximum slope of 1:12 or 8.33%, is that considered a range of from 0% to 8.33% which would allow no slope greater than 8.33% or is that a simple maximum which would allow a tolerance above 8.33%? Similarly, is a cabinet countertop that can be no higher than 34” AFF a range of from 0” to 34” AFF with no additional height allowed, or is a tolerance allowed for variations in the floor surface or cabinet construction?
A1.) The consistent technical assistance on this question has been that both are subject to tolerances.
