Truncated domes in a detectable warning surface shall have a center-to-center spacing of 2.3 inches (58 mm) minimum and 2.4 inches (61 mm) maximum, and a base-to-base spacing of 0.65 inch...
Search Results "Limited Access Space"
-
11B-705.1.1.2 Dome spacing
-
305.3 Size
The clear floor or ground space shall be 30 inches (760 mm) minimum by 48 inches (1220 mm) minimum....
-
305.3 Size
The clear floor or ground space shall be 30 inches (760 mm) minimum by 48 inches (1220 mm) minimum....
-
305.3 Size
The clear floor or ground space shall be 30 inches (760 mm) minimum by 48 inches (1220 mm) minimum....
-
11B-305.3 Size
The clear floor or ground space shall be 30 inches (762 mm) minimum by 48 inches (1219 mm) minimum....
-
11B-305.3 Size
The clear floor or ground space shall be 30 inches (762 mm) minimum by 48 inches (1219 mm) minimum....
-
4.1.5(4) ELEMENTS, SPACES, AND COMMON AREAS
If elements, spaces, or common areas are located in the existing building and they are not provided in the addition, then consideration should be given to making those elements, spaces,...
-
Parking Spaces for Vehicles Other Than RVs [F244.2.3.2.2]
Parking spaces for vehicles other than RVs within camping units with mobility features must comply with the following technical requirements for width, surface, and slope....
-
Lines of Sight Between Heads: ADA Standard Section 802.2.1.2
Where spectators are provided lines of sight over the shoulders and between the heads of spectators seated in the first row in front of their seats, spectators seated in wheelchair spaces...
-
11B-802.2.1.2 Lines of sight between heads
Where spectators are provided lines of sight over the shoulders and between the heads of spectators seated in the first row in front of their seats, spectators seated in wheelchair spaces...
-
11B-802.2.1.2 Lines of sight between heads
Where spectators are provided lines of sight over the shoulders and between the heads of spectators seated in the first row in front of their seats, spectators seated in wheelchair spaces...
-
Lines of Sight Between Heads: ADA Standard Section 802.2.2.2
standing spectators are provided lines of sight over the shoulders and between the heads of spectators standing in the first row in front of their seats, spectators seated in wheelchair spaces...
-
11B-802.2.2.2 Lines of sight between heads
standing spectators are provided lines of sight over the shoulders and between the heads of spectators standing in the first row in front of their seats, spectators seated in wheelchair spaces...
-
11B-802.2.2.2 Lines of sight between heads
standing spectators are provided lines of sight over the shoulders and between the heads of spectators standing in the first row in front of their seats, spectators seated in wheelchair spaces...
-
808.2 Turning Space
Where provided, areas that are raised or depressed and accessed by ramps or platform lifts with entry ramps shall provide unobstructed turning space complying with 304....
-
808.2 Turning Space
Where provided, areas that are raised or depressed and accessed by ramps or platform lifts with entry ramps shall provide unobstructed turning space complying with 304....
-
11B-705.1.1.2 Dome spacing
Truncated domes in a detectable warning surface shall have a center-to-center spacing of 2.3 inches (58 mm) minimum and 2.4 inches (61 mm) maximum, and a base-to-base spacing of 0.65 inch...
-
5. Accessible Features
Are accessible features inside and outside the lodging facility maintained in good working order?...
-
11B-705.1.1.2 Dome spacing
11B-705.1.1.2 Dome spacing....
-
Sec. 12163. Conformance of accessibility standards. [Section 243]
Accessibility standards included in regulations issued under this subpart shall be consistent with the minimum guidelines issued by the Architectural and Transportation Barriers Compliance...
-
A4.2.1(3) Space Requirements for Passing
(3) Space Requirements for Passing....
-
A4.2.1(3) Space Requirements for Passing
(3) Space Requirements for Passing....
-
304.3.1 Circular Space
304.3.1 Circular Space. The turning space shall be a space of 60 inches (1525 mm) diameter minimum. The space shall be permitted to include knee and toe clearance complying with 306....
- Employment Today - Chapter 2 - ADA FEHA Requirements