If a bank provides both interior and exterior ATMs, each such installation is considered a separate location....
Search Results "Interior Design"
-
11B-220.1 Automatic teller machines and fare machines
-
11B-404.2.4.3 Recessed doors and gates
Maneuvering clearances for forward approach shall be provided when any obstruction within 18 inches (457 mm) of the latch side at an interior doorway, or within 24 inches (610 mm) of the...
-
11B-220.1 Automatic teller machines and fare machines
If a bank provides both interior and exterior ATMs, each such installation is considered a separate location....
-
11B-404.2.4.3 Recessed doors and gates
Maneuvering clearances for forward approach shall be provided when any obstruction within 18 inches (457 mm) of the latch side at an interior doorway, or within 24 inches (610 mm) of the...
-
EXHIBIT F ADA Maintenance Checklist
Is there an unobstructed clear floor area at the interior side of the accessible door? ___ Yes ___ No c....
-
Public Building or Facility
A building or facility or portion of a building or facility designed, constructed, or altered by, on behalf of, or for the use of a public entity subject to title II of the ADA and 28 CFR...
-
Seat Height: ADA Standard Section 1009.2.4
The height of the lift seat shall be designed to allow a stop at 16 inches (405 mm) minimum to 19 inches (485 mm) maximum measured from the deck to the top of the seat surface when in the...
-
OCCUPIABLE SPACE
A room or enclosed space designed for human occupancy in which individuals congregate for amusement, educational or similar purposes or in which occupants are engaged at labor, and which...
-
11B-1002.5.4 Wheelchair storage space
Wheelchair storage spaces complying with Section 11B-305 shall be provided in or adjacent to unload areas for each required amusement ride seat designed for transfer and shall not overlap...
-
11B-1002.5.4 Wheelchair storage space
Wheelchair storage spaces complying with Section 11B-305 shall be provided in or adjacent to unload areas for each required amusement ride seat designed for transfer and shall not overlap...
-
OCCUPIABLE SPACE
A room or enclosed space designed for human occupancy in which individuals congregate for amusement, educational or similar purposes or in which occupants are engaged at labor, and which...
-
Allegion LCN 1460 Series Surface Mounted Door Control
Designed for maximum versatility, the 1460, available with multiple cover options, can be used for both commercial and institutional applications....
-
Story
That portion of a building or facility designed for human occupancy included between the upper surface of a floor and upper surface of the floor or roof next above....
-
11B-411.2.1.4.1.2 Identification
Identification shall be placed immediately to the left of the control button to which the designation applies....
-
11B-411.2.1.4.1.2 Identification
Identification shall be placed immediately to the left of the control button to which the designation applies....
-
General: ADA Standard Section 308.1
Section 308.1: of the ADA Standards covers information in the current ADA Standards for reach ranges.
-
Clear Floor Space: ADA Standard Section 1004.1
To optimize space use, designers should carefully consider layout options such as connecting ends of the row and center aisle spaces....
-
11B-809.9.2 Clear width
U-shaped kitchens, designed with parallel approach at a sink, range, cooktop or other fixtures and appliances located at the base of the U without knee and toe clearance, shall provide a...
-
11B-308.1 General
The following table provides guidance on reach ranges for children according to age where building elements such as coat hooks, lockers, or operable parts are designed for use primarily...
-
11B-809.9.2 Clear width
U-shaped kitchens, designed with parallel approach at a sink, range, cooktop or other fixtures and appliances located at the base of the U without knee and toe clearance, shall provide a...
-
11B-308.1 General
The following table provides guidance on reach ranges for children according to age where building elements such as coat hooks, lockers, or operable parts are designed for use primarily...
-
Expert Report of Ken Schoonover, P.E., KMS Associates, Inc. (August 7, 2018)
Sidewalks & Walkways: The cross slopes in the designated accessible routes exceed the maximum slope allowed of 1:48 (1991 ADA Stds 4.3.7; 2010 ADA Stds 403.3)....
-
Raised Characters: ADA Standard Section 703.2
Signs that are designed to be read by touch should not have sharp or abrasive edges. ...
-
INTRODUCTION
The four standard-setting agencies establish and enforce standards for design, construction, and alteration of particular types of buildings and facilities....
