Cal-Royal’s Finest Hydraulic Door Closer Series Meeting The Highest Industry Standards, Grade 1 Heavy-Duty Double Lever Arm With Extra Smooth Action Full Feature Multi-Size Commercial...
Search Results "Door Height"
-
Cal-Royal CR441 Series Hydraulic Door Closers
-
Cashier counters
Cashier counters: c. Provide a section of counter that is a minimum of 36" wide by a maximum of 36" high or an auxiliary accessible counter at the following locations: i....
-
H. Drinking Fountains
H. Drinking Fountains - Are at least 50% of the drinking fountains on each floor mounted so the spout is no higher than 36"? [ADA Stds. 4.15.3] Yes __ No __ N/A __ Comments:...
-
H8
H8. If lavatories are provided, does at least one have at least a 29 inch high clearance under the front apron with the top of the rim no more than 34 inches above the floor? [ADA...
-
Sec.36.304(b)(15)
(15) Installing a raised toilet seat;
-
§ 36.304(b)(15)
(15) Installing a raised toilet seat;
-
§ 38.113(d)(3) Exception
(3) Exception. Where platform set-backs do not allow the horizontal gap or vertical alignment specified in paragraph (d) (1) or (2), platform or portable lifts complying with...
-
408.3.2.1 Power Operation
Swinging doors shall be power-operated and shall comply with ANSI/BHMA A156.19 (1997 or 2002 edition) (incorporated by reference, see "Referenced Standards" in Chapter 1)....
-
Addendum G: Comparison of Transfer Abilities between Men and Women
age of 45 ± 16 years, body weight of 180.78 ± 55.12 pounds and a height of 68.11±0.6 inches....
-
Eliason Corporation SCP-8 High Pressure Laminate Traffic Double Door
-
Eliason Corporation SCP-8 High Pressure Laminate Single Traffic Door
-
404.2.4 Maneuvering Clearances
Minimum maneuvering clearances at doors and gates shall comply with 404.2.4....
-
1011.4, Item 2
Each exit door that is required to comply with Section 1011.1, and that leads directly to a grade-level exterior exit by means of a stairway or ramp shall be identified by a tactile exit...
-
1013.4, Item 2
Each exit door that is required to comply with Section 1013.1, and that leads directly to a grade-level exterior exit by means of a stairway or ramp shall be identified by a tactile exit...
-
Norton Surface Mounted Light Duty 210 Series Door Closer
The 210 Series door closer, is ideal for stocking distributors serving high volume aftermarket and storefront segments....
-
404.2.4 Maneuvering Clearances
Minimum maneuvering clearances at doors and gates shall comply with 404.2.4....
-
CRL PR40 Series Adjustable Spring Power Surface Mounted Door Closers
08 7100 CRL DC50 Series ANSI Grade 1 Surface Mounted Door Closers Applicable for Doors Ranging From 26" to 54" Wide and 33 to 264 Pounds Dual Valve Closing and Latching Speed Control...
-
404.2.4 Maneuvering Clearances
Minimum maneuvering clearances at doors and gates shall comply with 404.2.4....
-
Cal-Royal 700 Series Hydraulic Door Closers
Hydraulic door closer dual valve, closing and latching speed controlled by two separate regulating valves....
-
Corbin Russwin Inc. DC5000 Series Cam Action Door Closer
The DC5000 Series is a cam action door closer for slide arm and track applications....
-
Allegion LCN 1460 Series Surface Mounted Door Control
UL and cUL listed for self-closing doors without hold-open. Tested and certified under ANSI Standard A156.4, grade one....
-
DORMA BTS75V SERIES DOOR CLOSER
Floor-Concealed Door Closer The BTS75V Series of floor-concealed door closers offer adaptability to almost any installation....
-
Are locks operated by keys prohibited due to the pinching or twisting of the wrist their operation typically requires?
No, non-fixed portions of door or gate hardware, including keys and access cards, are not covered by the Standards, but those that can be used without pinching or turning will provide easier...
-
Hager Companies Round Offset Door Push/Pull Set 21
Round Offset Door Push/Pull Set Includes: - Two (2) pulls BTB Materials: - Aluminum, brass, bronze, stainless steel Note: - Available with 45 degree offset Certification: -...
