These clearances, which are permitted to overlap, may determine the width of corridors, including entry alcoves with offset doors....
Search Results "Continuous Width"
Commonly Searched Documents
-
Clearances for Side Approaches
-
Seeger et al.
Both unoccupied and occupied dimensions of device width and length were measured as well as a set of other basic dimensions....
-
9.5 LOCKER ROOMS
Unobstructed aisle space in front of lockers used by handicapped people shall be a minimum of 42 in (1065 mm) clear width....
-
§ 38.159(b)(7) Platform gaps
Any openings between the platform surface and the raised barriers shall not exceed 5/8 inch (16 mm) in width....
-
11B-406.5.12 Detectable warnings
The detectable warning shall extend the full width of the curb ramp (exclusive of flared sides) and shall extend either the full depth of the curb ramp or 24 inches (610 mm) deep minimum...
-
III. Handrails and Stanchions
Of course, such a handrail or stanchion cannot encroach upon the required 32 inch width required for the doorway or the route leading to the clear floor space which must be at least 30 by...
-
11B-406.5.12 Detectable warnings
The detectable warning shall extend the full width of the curb ramp (exclusive of flared sides) and shall extend either the full depth of the curb ramp or 24 inches (610 mm) deep minimum...
-
11B-705.1.2.3 Islands or cut-through medians
Detectable warnings at pedestrian islands or cut-through medians shall be 36 inches (914 mm) minimum in depth extending the full width of the pedestrian path or cut-through less 2 inches...
-
Protruding Objects and Outdoor Recreation Access Routes
Protruding objects are defined as constructed features (such as signs) that extend into the clear width area of an outdoor recreation access route, resting interval, or passing space and...
-
1016.4 Passing Spaces
This section requires passing spaces to be provided at intervals of 200 feet maximum where the clear width of outdoor recreation access routes is less than 60 inches....
-
Transfer Surface Size: Equipment Used by Patients in a Seated Position (M302.2.2)
The 21 inches minimum width is based on the ideal chair width recommended in Architectural Graphic Standards for auditorium seating....
-
405 Ramps
Exceptions included in the final rule for the clear width (405.5) and handrails (405.8) of ramps located in employee work areas recognize constraints posed by various types of equipment....
- GE Artistry™ Series 30" Free-Standing Electric Range ABS45DFWS
- Harris Communication SafeAwake Fire Alarm Aid with Bed Shaker
- Acoustiguide exSite Series Wand-Style Audio Guide
- Inpro Corporation IPC® 2000 Handrail
- Bradley 2 Station Express Deck Lavatory System EXD-2N
- Gamco Recessed Coverall Toilet Seat-Cover Dispenser - TSC-8
- ASI Storage Solutions Plastic Lockers
- Door King Inc. 6050 / 6100 Residential and Commercial Swing Gate Operator
- Door King Inc. 9000 Commercial and Industrial Slide Gate Operator
- Horton Automatics Profiler® Smoke-Rated Telescoping ICU/CCU Sliding Door
-
404.2.9 Door and Gate Opening Force
The maximum force pertains to the continuous application of force necessary to fully open a door, not the initial force needed to overcome the inertia of the door....
-
11B-227.3 Counters
One continuous counter can be used to provide different types of service. For example, order and pick-up are different services....