SETTLEMENT AGREEMENT BETWEEN THE UNITED STATES OF AMERICA AND SOUTH CAROLINA DEPARTMENT OF CORRECTIONS UNDER THE AMERICANS WITH DISABILITIES ACT DJ # 204-67-174
Search Results "Vehicle Floor Coordination"
-
SETTLEMENT AGREEMENT BETWEEN THE UNITED STATES OF AMERICA AND SOUTH CAROLINA DEPARTMENT OF CORRECTIONS UNDER THE AMERICANS WITH DISABILITIES ACT DJ # 204-67-174
-
F231.3 Holding Cells
Where provided, central holding cells and court-floor holding cells shall comply with F231.3....
-
231.3 Holding Cells
Where provided, central holding cells and court-floor holding cells shall comply with 231.3....
-
11B-502.7 Relationship to accessible routes
Wheel stops are an effective way to prevent vehicle overhangs from reducing the clear width of accessible routes....
-
11B-502.7 Relationship to accessible routes
Wheel stops are an effective way to prevent vehicle overhangs from reducing the clear width of accessible routes....
-
11B-502.7 Relationship to accessible routes
Wheel stops are an effective way to prevent vehicle overhangs from reducing the clear width of accessible routes. ◼...
-
5.3.2.1 Size
The clear floor or ground space shall be 60 inches (1525 mm) wide minimum measured parallel with the back of the pit toilet, and 56 inches (1420 mm) deep minimum measured parallel to the...
-
502.7 Relationship to Accessible Routes
Wheel stops are an effective way to prevent vehicle overhangs from reducing the clear width of accessible routes....
-
11B-231.3 Holding cells
Where provided, central holding cells and court-floor holding cells shall comply with Section 11B-231.3. ...
-
11B-231.3 Holding cells
Where provided, central holding cells and court-floor holding cells shall comply with Section 11B-231.3....
-
11B-231.3 Holding cells
Where provided, central holding cells and court-floor holding cells shall comply with Section 11B-231.3....
-
1. Accessible toilet
Accessible toilet with rear and side grab bars, clear floor space for wheelchair transfer, and an accessible flush valve....
-
231.3 Holding Cells
Where provided, central holding cells and court-floor holding cells shall comply with 231.3....
-
Location: ADA Standard Section 703.4.2
Signs containing tactile characters shall be located so that a clear floor space of 18 inches (455 mm) minimum by 18 inches (455 mm) minimum, centered on the tactile characters, is provided...
-
11B-233.3.1.2.6.1 Single building with one common (lobby) entrance
access to multifamily dwelling units, in a single building with one common (lobby) entrance, located on a site with difficult terrain conditions or unusual characteristics: All ground floor...
-
Side Approach
Side Approach The maximum reach depth for a high (54 inch maximum) reach is 10 inches, measured from the clear floor space....
-
Height from Finish Floor or Ground: ADA Standard Section 703.5.6
Visual characters shall be 40 inches (1015 mm) minimum above the finish floor or ground....
-
606.2 Clear Floor Space
606.2 Clear Floor Space. A clear floor space complying with 305, positioned for a forward approach, and knee and toe clearance complying with 306 shall be provided. EXCEPTIONS: 1....
-
5.1.3 Slope
The slope of the surface of the clear floor or ground space inside the camp shelter shall not be steeper than 1:48 (2 percent) in all directions....
-
5.3.5 Doors
The door shall not swing into or otherwise obstruct the clear floor or ground space required by 5.3.2.1. ...
-
5.1.9 Doors
The door shall not swing into or otherwise obstruct the clear floor or ground space or the turning space required by 5.1.4. ...
-
McGuire Manufacturing Co., Inc. 1151AWC: Offset with 151 Stainless Steel Basket Strainer
Offset sink strainer with stainless steel basket strainer with stainless steel basket. 2 3/4" x 4 3/8" OD.
-
Just Manufacturing Stainless Steel Cup Strainer ADA Compliant Drain System
Body of stainless steel. Strainer of stainless steel. Stopper of rubber. 17 gauge chrome plated brass tailpiece. Die-cast zinc lock...
-
McGuire Manufacturing Co., Inc. 155LATWC: Offset Lift and Turn PO Plug
Wheelchair lavatory strainer. Furnished with heavy brass elbow and 17GA seamless brass offset tailpiece. 8 3/4" x 5 1/8" OD.
