These comments addressed roadway design, speed bumps, crosswalks, on-street parking, audible signs and pedestrian signals, and emergency call boxes....
Search Results "Signal Level"
-
Public Rights-of-Way
-
R302.7 Surfaces
accessible elements and spaces that connect to pedestrian access routes: • Clear spaces (see R404.2), including clear spaces at operable parts (see R403.2) such as accessible pedestrian signals...
-
R204.2 Sidewalks
The accessible elements, spaces, and facilities located in the public right-of-way that pedestrian access routes must connect to include accessible pedestrian signals and pedestrian pushbuttons...
-
907.2.3 Group E
The capability to activate the evacuation signal from a central point is provided. 2.6....
-
Visual Alarms
At a minimum, visual signal appliances shall be provided in buildings and facilities in each of the following areas: restrooms and any other general usage areas (e.g., meeting rooms), hallways...
-
11B-1009.3.2 Submerged depth
Sloped entries shall extend to a depth of 24 inches (610 mm) minimum and 30 inches (762 mm) maximum below the stationary water level....
-
405.7 Landings
Ramps that do not have level landings at changes in direction can create a compound slope that will not meet the requirements of this document....
-
(c) Thresholds at patio, deck or balcony doors
The final Guidelines provide that exterior deck, patio, or balcony surfaces should be no more than 1/2 inch below the floor level of the interior of the dwelling unit, unless they are constructed...
-
12182(b)(2)(B)(ii) Equivalent service
usable by individuals with disabilities, it shall be considered discrimination for such entity to fail to operate such system so that, when viewed in its entirety, such system ensures a level...
-
504.3 Prompts
Authoring tools shall provide a mode of operation that prompts authors to create content that conforms to all Level A and Level AA Success Criteria and all Conformance Requirements in WCAG...
-
11B-405.7 Landings
Ramps that do not have level landings at changes in direction can create a compound slope that will not meet the requirements of this document....
-
11B-405.7 Landings
Ramps that do not have level landings at changes in direction can create a compound slope that will not meet the requirements of this chapter....
-
1009.3.2 Submerged Depth
Sloped entries shall extend to a depth of 24 inches (610 mm) minimum and 30 inches (760 mm) maximum below the stationary water level....
- Detecto 485 Series Stationary Wheelchair Scale
-
2.3.2 IR Receivers
In traversing the tubing leading from the receiver to the eartips, the frequency response of the acoustic signal may display several resonant peaks (Nabalek, Donahue, & Letowski l986...
-
Section 2. Undisturbed site
"Undisturbed site" means the site before any construction, levelling, grading, or development associated with the current project....
-
§ 35.151(g)(1)
(1) Wheelchair and companion seating locations are dispersed among all levels of the facility that are served by an accessible route;...
-
1009.2, Item 10
Exterior areas for assisted rescue complying with Section 1009.7 serving exits at the level of exit discharge....
-
A4.33.7 Types of Listening Systems
Signal spills over to adjacent rooms. Susceptible to electrical interference. Limited portability Inconsistent signal strength Head position affects signal strength....
-
Acceleration
This affects calculations for both minimum green time for traffic signals and for pedestrian clearance intervals....
-
TTY Use
(If the carrier does not have a queuing system, any caller gets a busy signal.)...
-
11B-704.3 Volume control telephones
If a volume adjustment is provided that allows the user to set the level anywhere from the base volume to the upper requirement of 20 dB, there is no need to specify a lower limit....
-
11B-704.3 Volume control telephones
If a volume adjustment is provided that allows the user to set the level anywhere from the base volume to the upper requirement of 20 dB, there is no need to specify a lower limit....
-
1118B.4
Changes in level up to 1/4 inch (6.4 mm) may be vertical and without edge treatment [see Figure 11B-5E(c)]....