, placed adjacent to the door on the latch side, in all enclosed stairways in buildings two or more stories in height to identify the floor level....
Search Results "Self-Leveling"
-
1022.9 Stairway identification signs
-
Sidewalks and Walkways
A sidewalk with raised and broken sections is a barrier to access ADA Requirements Sidewalk or walkway surfaces must be at least 36 inches wide, without abrupt level changes (no level...
-
11B-1009.2.7 Operation
The lift shall be capable of unassisted operation from both the deck and water levels....
-
11B-1009.2.7 Operation
The lift shall be capable of unassisted operation from both the deck and water levels....
-
Just Manufacturing Automatic Soap Dispenser
Self contained valve/nozzle (Peristaltic tube). Battery operated (6) AA size alkaline (1.5V). Product: JSPD-801...
-
Bobrick ConturaSeries Recessed Sanitary Napkin Disposal B-4353
Self-closing door pulls down for access to disposal. Furnished with removable, leak-proof, 1.2‑gal. (4.6-L) plastic receptacle....
-
Bobrick ClassicSeries Surface-Mounted Sanitary Napkin Disposal B-254
Self-closing panel covers disposal opening. Removable, leak-proof, 1.2‑gal. (4.6-L) plastic receptacle. Unit 10 11/16" W, 15 1/8" H, 4 1/16" D (270 x 385 x 105mm)....
-
§ 36.406(f)(1)
(1) Wheelchair and companion seating locations are dispersed to all levels of the facility that are served by an accessible route;...
-
410.4 Minimize Interference
ICT shall reduce interference with hearing technologies to the lowest possible level and shall conform to 410.4....
-
2.2 Surface
The type of surface should be appropriate to the setting and level of development....
-
Entrances
Entrances Problem The entrance area must be level (no level change greater than ½ inch) and should not slope steeply in any one direction....
-
Detecto 485 Series Stationary Wheelchair Scale
Detecto’s 485 incorporates an eye-level physician scale with a detachable ramp, allowing easy movement on and off the platform. The weigh beam is easily read from both sides....
-
11B-1009.3.2 Submerged depth
Sloped entries shall extend to a depth of 24 inches (610 mm) minimum and 30 inches (762 mm) maximum below the stationary water level....
-
405.7 Landings
Ramps that do not have level landings at changes in direction can create a compound slope that will not meet the requirements of this document....
-
(c) Thresholds at patio, deck or balcony doors
The final Guidelines provide that exterior deck, patio, or balcony surfaces should be no more than 1/2 inch below the floor level of the interior of the dwelling unit, unless they are constructed...
-
12182(b)(2)(B)(ii) Equivalent service
usable by individuals with disabilities, it shall be considered discrimination for such entity to fail to operate such system so that, when viewed in its entirety, such system ensures a level...
-
504.3 Prompts
Authoring tools shall provide a mode of operation that prompts authors to create content that conforms to all Level A and Level AA Success Criteria and all Conformance Requirements in WCAG...
-
11B-405.7 Landings
Ramps that do not have level landings at changes in direction can create a compound slope that will not meet the requirements of this document....
-
11B-405.7 Landings
Ramps that do not have level landings at changes in direction can create a compound slope that will not meet the requirements of this chapter....
-
1009.3.2 Submerged Depth
Sloped entries shall extend to a depth of 24 inches (610 mm) minimum and 30 inches (760 mm) maximum below the stationary water level....
-
General Tips for Interacting with Individuals with Disabilities
A passenger with a disability has the most information about his or her abilities, level of familiarity with the airport and airline, and needs when traveling....
-
Rockwood Manufacturing Company 70REA Push Plate - .050" Thick 3" x 12" Plate
• TEK - self-drilling screws. • TORX - security torx screws. • SA - self-adhesive mounting: 1⁄16" double face foam tape (no screw holes on plate)....
-
Rockwood Manufacturing Company 70A Push Plate - .050" Thick 3" x 12" Plate
. • TEK - self-drilling screws. • TORX - security Torx screws. • SA - self-adhesive mounting: 1/16" double face foam tape (no screw holes on plate). • Engraving on plates 4" wide or wider...
-
Rockwood Manufacturing Company 71A Push Plate - .062" Thick 3" X 12" Plate
• TEK - self-drilling screws. • TORX - security torx screws. • SA - self-adhesive mounting: 1⁄16" double face foam tape (no screw holes on plate)....
