Fixed elements or barriers can provide detection below objects not required to have knee or toe clearance....
Search Results "Barrier Removal"
Commonly Searched Documents
-
Wall-Mounted Objects
-
4.7.8 Utility and Dump Station Hookup Clear Floor or Ground Space
Bollards or other barriers shall not obstruct the clear floor or ground space in front of the hook-ups. ...
-
1016.8.4 Turning Space
This section requires a turning space complying with 304.2.3 of the Architectural Barriers Act Accessibility Guidelines where resting intervals are provided adjacent to an outdoor recreation...
-
Locating Controls & Devices: Percent of People Who Can Reach the Matrix Cell Indicated While Holding No Weight - Side Approach Power Chair
Horizontal distances in the positive range represent offset distance away from the body (or barrier depth) in relation to the lateral-most point, and the negative range implying that the...
-
1014.1 General
Exception 2 does not require camp shelters to comply with the technical requirements for protruding objects in 307 of the Architectural Barriers Act Accessibility Guidelines....
-
Locating Controls & Devices: Percent of People Who Can Reach the Matrix Cell Indicated While Holding No Weight - Side Approach Manual Wheelchair
Horizontal distances in the positive range represent offset distance away from the body (or barrier depth) in relation to the lateral-most point, and the negative range implying that the...
-
Locating Controls & Devices: Percent of People Who Can Reach the Matrix Cell Indicated While Holding No Weight - Side Approach Scooter
Horizontal distances in the positive range represent offset distance away from the body (or barrier depth) in relation to the lateral-most point, and the negative range implying that the...
-
68.1. Authority
2005, 30 TexReg 382; amended effective March 1, 2007, 32 TexReg 884) These rules are promulgated under the authority of Texas Government Code, Chapter 469, Elimination of Architectural Barriers...
-
11B-602.9 Pedestrian protection
When used, wing walls or barriers shall project horizontally at least as far as the drinking fountain and to within 6 inches (152 mm) vertically from the floor or ground surface....
- Whitehall Mfg. 4122ADA Two-Station Compact Scrub Sink
- Whitehall Mfg. 4121ADA One-Station Compact Scrub Sink
- Whitehall Mfg. 4123ADA Three-Station Compact Scrub Sink
-
Playground Study Site
Preparation of Playground Subsurface Our efforts began by removing the existing sand surface to a depth of 0.38 m (15 in.) (Fig. 2). All roots, stones, and vegetation were removed....
-
4.4 Knee and Toe Clearances
Knee Clearance Height Note: DETR (U.K.) values are estimates * One outlier from IDEA Center data removed because the wrong dimension was originally reported....
-
E202 General Exceptions (Section-by-Section Analysis)
We are proposing to remove this exception because there is nothing in the proposed 508 Standards that would require an agency to provide accessible ICT at a specific location, or that would...
-
A4.32.4 Height of Tables or Counters
Tables and Counters for Seated People 1 Conditions of Use Short Women in mm Tall Men in mm Seated in a wheelchair: Manual work- Desk or removable...
-
A4.32.4 HEIGHT OF WORK SURFACES
People* Conditions of Use Short Women Tall Men In mm In mm Seated in a wheelchair:Manual work: Desk or removable...
-
FAQ: How do I reply to a post in Corada Voices?
However, you may remove these by clicking on the "x" on each tag. Click here for how to add ADA reference(s) relevant to your post. (Why?)...
-
[A] ALTERATION
ETA Editor's Note ADA Title III [§36.402(b)(1)] also excludes asbestos removal from the definition of Alteration, unless it affects the usability of the building or facility....
-
Reach Range
A specification that these controls be to the side of the door has been removed in the final rule as unnecessarily restrictive....
-
Accessible Route to Parking
The proposed rule removed language in the original ADAAG that vehicles parked in accessible spaces not reduce the clear width of connecting accessible routes....
-
Door Maneuvering Clearance
The reference to latches has been removed....
-
Q3.) What are the types of “manufacturing processes” that were anticipated where the advisory says “tolerances recognized by this provision include… “those that may be a necessary consequence of a particular manufacturing process”?
Because the stiff shell is created on a form in one piece, it must taper from the back to the front to allow it to be removed from the form. ...
-
806.3 Guest Rooms with Communication Features
If a telephone-like handset is used, the external speakers can be turned off when the handset is removed from the cradle....