Integral wall flange finishes wall opening. Optional opposing wall flange wall on other side. SPT24247: 24"W, 24"H, 7"D - Pass through walls up to 6" thick....
Search Results "Back Wall"
- Carr Corporation Specimen Pass Through SPT24
-
4.4.2 Mammography Equipment and Scooters
As noted above, to obtain acceptable images, a woman’s chest wall must be flush with the breast platform....
-
Technical Infeasibility
requirements on existing developed sites located on steep terrain where necessary re-grading and other design solutions are not feasible; or work that would impact load-bearing walls...
-
11B-404.2.4.3 Recessed doors and gates
A door can be recessed due to wall thickness or because of the placement of casework and other fixed elements adjacent to the doorway....
-
11B-404.2.4.3 Recessed doors and gates
A door can be recessed due to wall thickness or because of the placement of casework and other fixed elements adjacent to the doorway....
- American Specialties Clothes/Towel Hook Strip 129
-
Bathroom
The Fair Housing Act requires reinforcements in bathroom walls to allow for later installation of grab bars at toilet, bathtub or shower, if provided....
-
11B-805.6 Hand washing fixtures, lavatories and sinks
inches (203 mm) minimum increasing to 29 inches (737 mm) high minimum above the finish floor or ground at the front edge of a counter with a built-in lavatory or at the front edge of a wall-mounted...
-
Reasonable Modification
Examples of Reasonable Modifications Granting a zoning variance to allow a ramp to be built inside a set-back....
-
11B-221.2.3.2 Vertical dispersion
When wheelchair spaces are dispersed vertically in an assembly facility they are placed at different locations within the seating area from front-to-back so that the distance from the screen...
-
STEP 3: MAKE SURE THE BUILDING PLANS DO NOT CONTAIN COMMON ADA MISTAKES.
Often, ADA mistakes at lodging facilities can be traced back to construction documents, such as site and building plans....
-
Protruding Objects and Trails
Clearing limits for trail construction and maintenance usually require that brush, limbs, trees, and logs be cut back a foot or more from the edge of the trail....
-
Suggested accessibility guidelines for exterior concrete surfaces
The tolerance for deviation from slope or plane for a stair tread from the back to the nosing is ± ¼ in (6 mm)....
-
Areas for further work
Slip resistance In the end, most of these issues were not considered by the trade and material organizations that participated in this study or reference was simply made back...
-
11B-221.2.3.2 Vertical dispersion
When wheelchair spaces are dispersed vertically in an assembly facility they are placed at different locations within the seating area from front-to-back so that the distance from the screen...
-
11B-221.2.3.2 Vertical dispersion
When wheelchair spaces are dispersed vertically in an assembly facility they are placed at different locations within the seating area from front-to-back so that the distance from the screen...
-
2.2.3 Functional Reach
This is similar to a wheelchair occupant facing a wall such that the forward-most aspect of their foot and/or wheelchair was touching the wall....
-
Swimming pools. (Section-by-Section Analysis)
First, the Department is proposing to add § 35.150(b)(5)(ii) to provide that swimming pools that have over 300 linear feet of swimming pool wall and are not being altered will be required...
-
Test Courses & Surfaces
Table 2 Reference Carpet and Pad Carpet Code Level loop, 100% nylon with a woven polypropylene backing; 0.16 in pile height; 28 oz pile weight C1...
-
4. Organization of Technical Criteria
Criteria Applies Supine, prone, or side-lying position (M301) Transfer surface, including height, size, and transfer sides Transfer supports, stirrups, and head and back...
- Landscape Forms Inc. Parc Vue Bench Collection
- ASI Storage Solutions Plastic Lockers
-
Slide Board Wheelchair Transfer
Requires the Registered User plan or above. Login!
- Rebuilding Together Of the Palm Beaches - West Palm Beach, FL
