407.12.1 Vertical Reference Plane (Section-by-Section Analysis) This section proposes that the positioning of operable parts for side reaches and forward reaches be determined with respect...
Search Results "Patient in Prone Position"
Filters
Commonly Searched Documents
-
407.12.1 Vertical Reference Plane (Section-by-Section Analysis)
-
5.3.3.2 Location Where Walls Provided
Where walls or partitions are provided, the seat shall be positioned with a wall or partition to the rear and to one side of the seat for a left-hand or right-hand approach. ...
-
5.3.3.2 Location Where Walls Provided
Where walls or partitions are provided, the seat shall be positioned with a wall or partition to the rear and to one side of the seat for a left-hand or right-hand approach....
-
§ 38.23(b)(2)(ii) Exception
., “rotary lift”), the requirements of this paragraph prohibiting the lift from being stowed while occupied shall not apply if the stowed position is within the passenger compartment and...
-
11B-902.4 Dining surfaces and work surfaces for children’s use
surfaces that are used primarily by children 5 years and younger shall not be required to comply with Section 11B-902.4 where a clear floor or ground space complying with Section 11B-305 positioned...
-
11B-902.4 Dining surfaces and work surfaces for children’s use
surfaces that are used primarily by children 5 years and younger shall not be required to comply with Section 11B-902.4 where a clear floor or ground space complying with Section 11B-305 positioned...
-
Sargent 8200 Mortise Lock with BHW Trim
Available with Microshield, an antimicrobial coating 6 Lobe head security screws (Torx type) Matching thumbturn available Patent Pending Ideally suited for: Behavioral Health Units, Patient...
-
ADA Checklist: Health Care Facilities and Service Providers
The purpose of this pamphlet is to provide practical, cost-effective solutions concerning access to services and facilities by your patients who are blind, deaf-blind, or visually impaired...
-
AVAILABLE DATA DO NOT SUPPORT DEPARTING FROM THE CURRENTLY ACCEPTED STANDARD OF 19-INCH TRANSFER SURFACE HEIGHT
The resting position of a person before attempting an independent transfer is important, and the Committee members valued the study’s useful information in evaluating potential recommendations...
-
11B-904.4.1 Parallel approach
A clear floor or ground space complying with Section 11B-305 shall be positioned for a parallel approach adjacent to the 36 inch (914 mm) minimum length of counter....
-
Eunice Noell-Waggoner, IES, LC. Value, Contrast and Reflections
A negative example is shown in slide 3, left photo; a positive example is shown in slide 3, right photo....
-
404.2.9 Door and Gate Opening Force
These forces do not apply to the force required to retract latch bolts or disengage other devices that hold the door or gate in a closed position....
-
11B-604.2 Location
The water closet shall be positioned with a wall or partition to the rear and to one side....
-
11B-904.4.1 Parallel approach
A clear floor or ground space complying with Section 11B-305 shall be positioned for a parallel approach adjacent to the 36 inch (914 mm) minimum length of counter....
-
11B-604.2 Location
The water closet shall be positioned with a wall or partition to the rear and to one side....
-
Cybex Total Access Overhead Press Exercise Machine
Choice of Handle Positions Choice of upper and lower handle positions caters to wheelchair users, shorter users and those with reduced balance....
-
Cybex Total Access Lat Pull Exercise Machine
This permits correct pelvic positioning and avoids a round back during exercise....
-
Recommendations
a minimum flat surface of 33 in. length for platforms accommodating wheeled mobility devices excluding scooters aids that can help wheelchair users mount the platform and position...
-
R308.1.2.1 Platform and Vehicle Floor Coordination
Boarding platforms shall be positioned to coordinate with vehicles in accordance with the applicable requirements in 49 CFR parts 37 and 38....
-
12113(c) Qualification standards and tests related to uncorrected vision
selection criteria based on an individual’s uncorrected vision unless the standard, test, or other selection criteria, as used by the covered entity, is shown to be job-related for the position...
-
404.2.7 Door and Gate Hardware
Where sliding doors are in the fully open position, operating hardware shall be exposed and usable from both sides....
-
404.2.7 Door and Gate Hardware
Where sliding doors are in the fully open position, operating hardware shall be exposed and usable from both sides....
-
Conclusion
The opinions expressed herein do not necessarily reflect the position or policy of the U.S. Department of Labor....
-
Is latch-side maneuvering clearance as specified in the Standards applicable to doors with panic bars?
Latch-side clearance not only provides proper positioning at door hardware but also facilitates proceeding through doors against the force of closers....
