Clear floor or ground space complying with Section 11B-305 shall be provided and shall be positioned at the end of the bench seat and parallel to the short axis of the bench....
Search Results "Non-Positive Shut Off"
Filters
Commonly Searched Documents
-
11B-903.2 Clear floor or ground space
-
805.3 Clear Floor or Ground Space
The clear floor space shall be positioned for parallel approach to the side of the bed....
-
805.3 Clear Floor or Ground Space
The clear floor space shall be positioned for parallel approach to the side of the bed....
-
§ 36.303(f)(2)
(2) A clear, sufficiently large, and sharply delineated picture of the interpreter's head and the participating individual's head, arms, hands, and fingers, regardless of his body position...
-
§ 35.160(d)(2)
(2) A clear, sufficiently large, and sharply delineated picture of the interpreter's head and the participating individual's head, arms, hands, and fingers, regardless of his body position...
-
11B-903.2 Clear floor or ground space
Clear floor or ground space complying with Section 11B-305 shall be provided and shall be positioned at the end of the bench seat and parallel to the short axis of the bench....
-
§ 38.107(a)(2)
Seats shall not be sprung to return to a lifted position....
-
§ 38.123(a)(2)
Seats shall not be sprung to return to a lifted position....
-
11B-903.2 Clear floor or ground space
Clear floor or ground space complying with Section 11B-305 shall be provided and shall be positioned at the end of the bench seat and parallel to the short axis of the bench....
-
Automatic Curtain, Ltd. Remote Controlled Automatic Roller Shade System II
Features: • Remote control can manage 5 sets of units without interference of each other • Stops at any position preferred • “Opening position” and “Stop Position” are programmable...
-
405.9 Edge Protection
Edge protection shall not be required on the sides of ramp landings having a vertical drop-off of ½ inch (13 mm) maximum within 10 inches (255 mm) horizontally of the minimum landing area...
-
405.9 Edge Protection
Edge protection shall not be required on the sides of ramp landings having a vertical drop-off of ½ inch (13 mm) maximum within 10 inches (255 mm) horizontally of the minimum landing area...
-
405.9 Edge Protection
Edge protection shall not be required on the sides of ramp landings having a vertical drop-off of 1/2 inch (13 mm) maximum within 10 inches (255 mm) horizontally of the minimum landing area...
-
What types of facilities are covered by DOT’s ADA Standards (and are required to have detectable warnings on curb ramps)?
Detectable warnings are required at rail station boarding platforms with open drop-offs at any transit facility, including private sector transit facilities subject to DOJ’s ADA Standards...
-
ELECTRIC VEHICLE (EV)
For the purpose of this code, off-road, self-propelled electric vehicles, such as industrial trucks, hoists, lifts, transports, golf carts, airline ground support equipment, tractors, boats...
-
ELECTRIC VEHICLE (EV)
For the purpose of this code, off-road, self-propelled electric vehicles, such as industrial trucks, hoists, lifts, transports, golf carts, airline ground support equipment, tractors, boats...
-
407.12 Reach Height (Section-by-Section Analysis)
Proposed 407.12 parallels existing 508 Standards § 1194.25(j), which applies side reach requirements to ICT that is “freestanding, non-portable, and intended to be used in one location.”...
-
Garaventa Evacu-Trac CD7 Evacuation Chair
They are shut down during an emergency for safety reasons. People are expected to use the stairs to evacuate. But what about people with disabilities who can not use stairs?...
-
11B-604.5.1 Side wall
grab bar shall be 42 inches (1067 mm) long minimum, located 12 inches (305 mm) maximum from the rear wall and extending 54 inches (1372 mm) minimum from the rear wall with the front end positioned...
-
Stowage of Wheelchairs and Mobility Aids
housing, if any, are clearly marked as being non-spillable....
-
Q4.) Are conditions like door closers that require force in excess of the maximum allowed by the standards considered true tolerances or are they simply non-compliance with the maintenance requirements of 35.133 or 36.211?
A4.) In our opinion, the plain language of the term “Construction and Manufacturing Tolerances” does not include adjustable conditions that can meet the detailed requirements when...
-
Sargent 281 Series Cast Iron Door Closer
Features ANSI/BHMA Grade 1 (A156.4) Meets Buy America Act Conforms to UL10C and UBC for positive pressure fire test 10 Year Warranty Versatile mounting applications permit...
-
11B-1008.2.3 Water play components
Providing an aquatic wheelchair made of non-corrosive materials and designed for access into the water will protect the water from contamination and avoid damage to personal wheelchairs....
-
§382.133(c)(1)
(1) A portable oxygen concentrator (POC), a ventilator, a respirator or a continuous positive airway pressure machine that displays a manufacturer's label that indicates the device meets...
