(c) Entities submitting the above certifications and plan elements in lieu of a completed plan on January 26, 1992, must submit a complete plan by July 26, 1992....
Search Results "Element"
2010 ADA Definition
Element: An architectural or mechanical component of a building, facility, space, or site.
-
§ 37.141(c)
-
PLAY COMPONENT
[DSA-AC] An element intended to generate specific opportunities for play, socialization, or learning....
-
Play Component
An element intended to generate specific opportunities for play, socialization, or learning....
-
4.3.4 Knee and Toe Clearances
The crease of the foot and lower leg in contact with the built element (Dorsal foot point as reference); 3....
-
Introduction
The scoping requirements specify when and where elements must be accessible....
-
Accessible Jury Boxes, Attorney Areas, and Witness Stands
206.2.4 of the 2010 Standards requires, in new construction and alterations, at least one accessible route to connect accessible building or facility entrances with all accessible spaces and elements...
-
Accessible Meeting Location
Minimum requirements for an accessible temporary event include the following accessible elements: parking; route to the building entrance from accessible parking spaces, drop-off areas and...
-
Technical Memorandum TM 2012-08 Private Clubs
accordance with TAS 201.1, the requirements of the Texas Accessibility Standards are to be applied to all areas of a facility unless exempted, or where scoping limits the number of multiple elements...
-
Detectable Warnings [4.29]
These cues may include ambient sounds, edges and other physical elements that can be sensed by using a cane, and texture changes underfoot. Curbs are an important cue....
-
4.1.6(1)(j) EXCEPTION
Any elements or features of the building or facility that are being altered and can be made accessible shall be made accessible within the scope of the alteration....
-
308.3.1 Unobstructed
Where a clear floor or ground space allows a parallel approach to an element and the side reach is unobstructed, the high side reach shall be 48 inches (1220 mm) maximum and the low side...
-
202.3.1 Prohibited Reduction in Access
Those regulations state: “If the 2010 Standards reduce the technical requirements or the number of required accessible elements below the number required by the 1991 Standards, the technical...
-
Seton Texas State ISA Parking Sign
clearly seen at night Signs with non-reflective surface are perfect for day time use Choose to have Seton UltraTuff™ on your sign to boost its protection from the different elements...
-
305.5 Position
Unless otherwise specified, clear floor or ground space shall be positioned for either forward or parallel approach to an element....
-
§ 1194.21(e)
(e) When bitmap images are used to identify controls, status indicators, or other programmatic elements, the meaning assigned to those images shall be consistent throughout an application...
-
Obstructions
An obstruction is any element that violates the protruding object requirements of TAS 204 and 307. ...
-
R405 Knee and Toe Clearance (Section-by-Section Analysis)
R405 Knee and Toe Clearance (Section-by-Section Analysis) The technical requirements for knee and toe clearance apply where space beneath an element is included as part of the clear space...
-
R405.2.1 General
Space under an element between the finish surface and 230 mm (9 in) above the finish surface shall be considered toe clearance and shall comply with R405.2....
-
Chapter R3: Technical Requirements (Section-by-Section Analysis)
Chapter R3: Technical Requirements (Section-by-Section Analysis) Technical requirements specify what design criteria elements, spaces, and facilities must comply with in order to be considered...
-
2. Protruding Objects
Accessible element or space ANSI A117.1 section APPLICATION 2....
-
12. Seating, tables, or work surfaces
Accessible element or space ANSI A117.1 section APPLICATION 12....
-
Sec.36.607(a)(1)
(1) A certification shall be considered a certification of equivalency only with respect to those features or elements that are both covered by the certified code and addressed by the standards...
-
§ 36.606(a)(1)
(1) A certification shall be considered a certification of equivalency only with respect to those features or elements that are both covered by the certified code and addressed by the standards...
-
4.1.6(1)(f)
(f) No new accessibility alterations will be required of existing elements or spaces previously constructed or altered in compliance with earlier standards issued pursuant to the Architectural...
